Page 1
theplanetheroes.com
Figures sold separately and subject to availability.
Please keep this instruction sheet for future reference, as it contains important information.
Requires four “AA” (LR6)
alkaline
batteries batteries (not included). Adult assembly is required.
Tool required for battery replacement: Phillips screwdriver (not included).
Figures sold separately and subject to availability.
Please keep this instruction sheet for future reference, as it contains important information.
Requires four “AA” (LR6)
Tool required for battery replacement: Phillips screwdriver (not included).
alkaline
batteries batteries (not included). Adult assembly is required.
Page 2
Base Tube
assembled parts
Solar System Spinner
Dome Bottom
Radar Dish
Accessory Arms
2 Base Supports
Dome Top
Platform
Dome Panel
Base
2
Page 3
Base
Supports
Slot
Base
Slot
1
• Place the base on a at surface.
• “Snap” each base support into the slots in the front of the base.
Radar Dish
Dome Bottom
4
• “Snap” the radar dish onto the dome top.
• “Snap” the dome top onto the dome bottom.
Hint: Press near each of the six tabs to “snap” the parts together.
3
Dome Top
Page 4
assembly
Base Tube
Base
2
• “Snap” the base tube into the hole in the center of the base.
Dome Panel
Dome Assembly
5
• Line up the tabs on the dome assembly with the slots in the back side of the dome panel.
• “Snap” the dome assembly tabs into the slots in the dome panel.
4
Page 5
Platform
B
Base Support
Base Tube
A
B
Base Support
3
• First, t the back of the platform on top of the base tube A.
• Then line up the tabs on the top of the base supports with the slots in the platform B.
• Push down on the platform above the base tube and both base supports to “snap” it in place.
Dome Assembly
Large Peg
6
• Fit the dome assembly onto the large peg on the platform.
• Push down on the dome assembly to “snap” it in place.
5
Page 6
Accessory Arm
assembly
Solar System Spinner
Accessory Arm
7
• “Snap” the accessory arms into the holes on the dome and the base of the headquarters.
Hint: Each arm will only t in one place. If it does not seem to t, try a different accessory arm.
• “Snap” the solar system spinner into the hole in the platform.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
6
Page 7
Battery INSTALLATION
1.5V x 4
"AA" (LR6)
• Locate the battery compartment on the front of the toy.
• Loosen the screw in the battery compartment door with a Phillips screwdriver.
• Remove the battery compartment door.
• Insert four “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver.
• If the toy begins to operate erratically, you may need to reset the electronics. Slide the power/
volume switch on the toy off and then back on.
• When lights or sounds from this toy become faint or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities.
7
Page 8
l
Power/Volume
Switch
protection from the evi
Mission Button
Sound Effects & Music Button
• Slide the power/volume switch to on with low volume , on with high volume or off .
• Press the top button for your assignments. Watch the dome light up when you are assigned
a mission!
• Press the bottom button on the solar panel for the Planet Heroes™ theme music and other
cool sound effects.
8
Page 9
forces of destruction!
Asteroid Buster Button
Solar
System
Spinner
Trap Door
Button
• Pull the lever on the side of the dome to open the door to the turbo shuttle.
• Load an asteroid buster into the slot in the turbo shuttle. Push to “click” into place.
• Push the button on the turbo shuttle to launch the asteroid busters.
Do not aim at eyes of face. Only use projectiles supplied with this toy. Do not re at point
blank range.
• Push the button below the solar system spinner to open the trap door and send the evil forces
to the holding center!
9
Page 10
Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA M7678pr-0920
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA M7678pr-0920
10
Loading...