Fisher-Price M0779 Instruction Sheet
TM
Keep these instructions for future reference as they
contain important information. IMPORTANT: Please
read all “Consumer Information” before operating
your vehicle.
Y
CAUTION:
cause burns if electronics get wet. Do not
operate vehicle through water or snow.
I. CONTENTS/ FEATURES
Vehicle
Transmitter
Surfaces may become hot and
q Infra-red signal LED
w Driving controls
e Lights / Sounds effects
r Battery door
t ON(I) / OFF(O) / TRYME (X) switch
y Reset button
u Try me button
6+
Y
CAUTION:
keep all hair away from the wheels.
q
To prevent entanglement,
M0779-0920
e
X
w
u
w
y
r
t
u
r
II. BATTERY INSTALLATION
Requires 3AA alkaline batteries for vehicle and 3 AAA
alkaline batteries for the transmitter. Batteries included are
for demonstration purposes.
Vehicle
1. Use a screwdriver (not included) to unscrew the battery
door screw, remove the battery cover.
2. Remove batteries included for demonstration purposes
and dispose of them safely. Install 3 new AA batteries
with polarity (+/-) as shown inside the battery
compartment.
3. Replace battery cover and tighten screw.
Tr ansm it ter
1. Use a screwdriver (not included) to unscrew the battery
door screw, remove the battery cover.
2. Install 3 new AAA batteries with polarity (+/-) as shown
inside the battery compartment.
3. Replace battery cover and tighten screw.
III. OPERATION
Infrared LED in Transmitter needs to point towards vehicle during
playing. If the vehicle doesn't respond well when a button in
transmitter is pressed, control the transmitter to point toward
vehicle again.
X
3xAA
3 x AAA
q Forward / Lights and Sounds
w Reverse / Lights and Sounds
e Turbo / Lights and Sounds
r Lights effects
RESET button:
Press reset button when car seems
can't get Infra-red signal properly.
RESET button
eq
rw
Loading...