Page 1
Please keep this instruction sheet for
future reference, as it contains
important information.
Requires three “AA”
batteries for
operation (included).
An adult must attach
toy to a crib and
replace batteries.
Tool required for
battery replacement:
Phillips screwdriver
(not included).
L7336
1
www.fi sher-price.com
Page 2
Consumer Information
WARNING
To prevent falls and
entanglement: This product
will not attach to all
crib designs. Do not add
additional strings or straps to
attach to a crib or playpen.
Battery Replacement
Battery Compartment Door
2
Page 3
Battery Replacement
For best performance, we recommend
replacing the batteries that came with
this toy with three, new alkaline“AA”
(LR6) batteries.
• Open the fasteners on the back of the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
•
Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• Close the fasteners on the toy.
• If sounds become faint or stop, it's time for an
adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
1.5V x 3
“AA” (LR6)
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
3
Page 4
Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to
a crib or playpen according to the instructions. Do not add additional strings or straps to
attach to crib. Check frequently.
Attachment Strap
Crib Rail
Note: If you are attaching this toy to a crib
side rail that can be lowered and raised,
make sure the crib side rail is in the raised
(locked) position whenever a child is in
the crib.
• Tie the toy’s attachment straps to the top
crib rail.
Note: It is better to tie the straps in
a knot than a bow, since a bow may
be easily untied.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. L7336pr-0920
© 2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
4
Page 5
Fun Sounds and Music!
• Tie the toy’s attachment straps to
a stroller, car seat or high chair!
• Open the fasteners on the back of
the toy. Slide the power/volume switch
to on with low volume or on with
high volume . Close the fasteners.
• Tug the teether for fun sounds
and music.
• When your child is finished playing
with this toy, slide the power/volume
switch to the off position .
5
Page 6
Care FCC Statement
• To clean, wipe the surface of this toy with
a damp cloth. Do not immerse this toy.
• This toy has no consumer serviceable parts.
Please do not take this toy apart.
United States Only
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in
a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
6
Loading...