
Parts
A. 3 End Rails
B. Small Tower with
Toll Booth
C. 3 Small Towers
D. Main Tower
E. 4 Side Rails
F. 4 Supports
G. Span
H. 2 Span Ends
Part not shown: 1 Figure
E
A
B
x3
C
D
x3
F
G
x4
x4
H
x2

Assembly
1
• Locate the square mark on both the
side of a support and on the span
assembly. Match the squares and
“snap” the support into the underside
of the span assembly, as shown.
• “Snap” the remaining supports into
the span matching the square marks
on each.
SPAN
SPAN ENDS
• “Snap” the span ends onto
the span.
2
SQUARES
SUPPORTS
3
• “Snap” the four side rails into
the main tower, as shown.
SIDE RAILS
MAIN TOWER

Assembly
4
SQUARE
SMALL
TOWERS
• “Snap” the end rails to the small
towers, as shown.
SMALL TOWER
WITH TOLL BOOTH
• Locate the square mark near the
bottom of each small tower.
• With the square marks facing
out, “snap” the small towers and
tower with toll booth to the side
rails, as shown.
5
END RAILS
6
• “Snap” each of the towers onto the
span assembly.
Assembly is now complete.

So Many Ways to Play!
• Remove the supports for a groundlevel bridge.
Multiple Levels
of Track Layouts!
Track not included.
1
• Use supports and straight tracks (sold
separately) to build an elevated assembly.
3
•
The toll gate lifts and lowers.
• To build a ground-level layout, separate the span
assembly from the supports and place the span
assembly on the floor.
• Attach straight tracks (sold separately) to either
end of the span assembly.
2
• Use an Elevation Track Pack™ (sold separately)
to access the suspension bridge.
• Attach ramp assemblies (sold separately) to
the ends of the span.

Visit www.fisher-price.com to see
the entire world of GeoTrax® accessories!
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
No tools needed for assembly.
Wipe the toy with a clean, damp cloth. Do not immerse.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
©2007 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. L5893pr-0920