L5066
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries (included).
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver (not included).
www.fisher-price.com
Parts
Base
2 Hanging Toys
Bear
Foot
2 Supports
Paddle
4 Plastic Balls
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. L5066pr-0920
2 Chutes
Soft Ball
4 Links
#6 x 1/2" Screws – 13
Shown Actual Size
Note: Tighten and loosen all screws with a
Phillips screwdriver. Do not over-tighten screws.
Assembly
CAUTION
This product contains small parts.
For assembly by an adult. Take extra care
during unpacking and assembly.
Chutes
Base
Foot
3
• Fit the foot onto the two supports.
• Insert four screws into the foot and tighten.
• Set the assembly upright.
1
• Position the base upside-down on a flat surface.
• Fit the two chutes into the openings in the base, as shown.
• Insert two screws into each chute and tighten.
Supports
Press
Press
4
• Press and hold the two buttons on the hubs. Then lift the
arch until it “clicks” in place.
2
• Fit the two supports into the openings in the base, as shown.
• Insert two screws into each support and tighten.
3