Fisher-Price K3799, L1346 User Manual
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6)
alkaline
batteries for the remote (batteries not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
K3799
L1346
Please keep this instruction sheet for future reference,
Please keep this instruction sheet for future reference,
Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6)
Requires three “D” (LR20) alkaline batteries for the mobile and two
“AA” (LR6) alkaline batteries for the remote (batteries not included).
alkaline
Tool required for assembly: Phillips screwdriver (not included).
Tool required for assembly: Phillips screwdriver (not included).
as it contains important information.
as it contains important information.
batteries for the remote (batteries not included).
Adult assembly is required.
Adult assembly is required.
™
www.fisher-price.com
Consumer Information
WARNING
• Possible entanglement injury. Keep out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product will not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• The mobile portion of a product may be used from birth until 5 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Always attach with all provided fasteners (clamp) tightly to a crib or playpen according to the
instructions. Check frequently.
2
Base
Parts
3 Soft Toys
Mobile Hub
Clamp
Remote
Crib Adaptor
Arm
Note: All of the screws used to assemble this toy are located in the product.
Follow these instructions carefully to fully secure the screws.
Tighten and loosen all screws with a Phillips screwdriver. Do not overtighten.
3
3 Leaves
Base Battery Installation
Battery Compartment
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib adaptor and remove it first.
• Insert three “D” (LR20) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the base will require replacement
more often than the batteries in the remote. When sounds or light become faint or movement of
the mobile is sluggish, it’s time for an adult to replace the batteries in the base.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. K3799a-0920
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
4
Remote Battery Installation
Battery
Compartment
• Locate the battery compartment on the back of the remote.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert two “AA” (LR6) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
IMPORTANT! If the mobile does not respond to the remote, it does not mean that the battery
power in the remote is low. Replace the batteries in the remote if the LED signal indicator on the
remote is dim when the button is pressed. If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the batteries in the battery compartment to
make sure they are properly installed.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
5
Loading...