This equipment has been tested and found to comply with the limits for a Class B
ON / OFF
switch
Try-me
pull tab
USB port
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Mattel Inc. 333 Continental Blvd. El Segundo, CA (310) 252-2400
NOTE: Changes or modifications not expressively approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
TM
INSTRUCTIONS
Please keep these instructions for future reference
as they contain important information.
BEFORE YOU BEGIN
Remove and discard the “Try Me” pull-tab found on the back of the teddy,
next to the battery compartment and USB port.
Once the “Try Me” pull-tab is removed, the toy will perform its full play pattern
as described below.
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, NY 14052 U.S.A.
PRINTED IN CHINA.
Manufactured for Fisher-Price.
© 2007 Mattel, Inc. All Rights Reserved.
Fisher-Price and the Fisher-Price logo are U.S. trademarks
of Mattel, Inc.
Packaging and address should be retained for future reference:
Mattel Canada Inc., Mississauga, Ontario L5R 3W2.
You may call us free at 1-888-892-6123.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB.
Helpline 01628500303.
Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 1106, South Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P)
Lot 13.5, 13th Floor, Menara Lien Hoe,
Persiaran Tropicana Golf Country Resort, 47410 PJ.
Tel:03-78803817, Fax:03-78803867.
Mattel, Inc., 333 Continental Blvd., El Segundo, CA 90245 U.S.A.
K8751 / M1754
REAR FRONT
IMPORTANT!
If you continue to experience
trouble programming your
Knows Your Name doll,
DO NOT RETURN THE
PRODUCT TO THE STORE.
We’re just a phone call away.
Call our consumer affairs hotline
toll free at 1-888-892-6123.
Fabric seam fastener
NOTES TO CONSUMER
Under certain conditions, the toy can malfunction and lose memory due to
static electricity. If this occurs, reprogram the toy by re-attaching your
USB cable and performing another download.
ID. K8751-09 20 / M1754-0920
HOW TO PERSONALIZE
YOUR TEDDY
1. Connect the teddy to
your computer using a
standard USB A to
USB B cable, such as
those used with most
printers (not included).
2.
Go to www.fisher-price.com/us/knowsyourname
and follow the instructions.
3. Click “PERSONALIZE”
to download your child’s
name
to the teddy.
You can change your names and settings at any time by reconnecting the toy
to your computer, going back to the website, and performing another download.
Now you are ready to play!
MINIMUM SYSTEM REQUIREMENTS:
USB – Version 1.1 or higher / Hard drive space – 50 MB available
Memory – 128 MB, 256 MB recommended
CPU – 350 Mhz, 800 Mhz recommended
Video Resolution – 800x600, 1024x768 recommended
Video Color Depth – 256 colors or higher
Operating System – Windows 2000, XP or higher
Browsers:
• Microsoft Internet Explorer 6.0 or higher
• Netscape 8 or higher
• Mozilla Firefox 1.0 or higher
• Opera 9.0 or higher
Adobe Flash Player 8 or above / User input – keyboard & mouse
Internet – High speed connection recommended
NOTE: Installation time will vary depending on the computer used,
but may require up to 15 minutes.
HOW TO PLAY
Slide the DAY / OFF / NIGHT switch found next to the battery compartment
and USB port to the desired position.
Day Mode
• Slide the switch to the DAY position.
• Press teddy’s tummy to activate the personalized phrases, rhymes,
and songs.
Night Mode
• Slide the switch to the NIGHT position.
• Press teddy’s tummy to activate 10 minutes of uninterupted music.
• Press teddy’s tummy again if you want to stop the music.
• After 10 minutes of uninterupted music, the music stops. Press teddy’s
tummy to start again.
At any time you can slide the switch to the OFF position to de-activate the
tummy switch entirely.
BATTERY INSTALLATION:
Open up fabric fastener seam in back
of body to expose battery compartment.
Unscrew and lift cover away.
Replace batteries as shown.
Batteries included are for
demonstration purposes only.
For longer life use only alkaline
batteries.
Requires 3 “AA” (LR6) batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your
toy (product). To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are to be removed from the toy before being charged (if designed to be removable).
• Rechargeable batteries are only to be charged under adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this toy in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product with household waste
(2002/96/EC).
Check your local authority for recycling advice and facilities (Europe only).
INSIDE (LEFT) FRONT (RIGHT)
Item : K8751-0920 / M1754-0920
Version : English
Size : 297 x 210 mm
Paper : Woodfree Paper 80 gsm
Color : Black