Page 1
Wagon
K6670
Developmental classics
enrich baby’s play
Walker
™
www.fisher-price.com
Page 2
Base
Parts
Handle
2 Hubs
Assembly
1
Smooth Side Up
• Position the shape sorter with the
smooth outer edge facing up.
• At an angle, fit a peg on one side of the
shape sorter into the hole in the base.
• While bending the shape sorter slightly,
fit the other peg into the other hole in
the base.
Shape Sorter
3 Shape Sorter
Blocks
Roller Ball
Part not shown: Label Sheet
2
Page 3
Assembly
Hint: You can assemble the handle in
either of two positions: Walker or Wagon.
Walker
2
• “Snap” the hubs to the back of the
base, as shown.
3
• At an angle, insert a peg on the roller
ball into the socket in the front of the
handle. Then, push to “snap” the other
peg on the roller ball into the other
socket in the handle.
PRESS
PRESS
4
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the base.
Wagon
PRESS
PRESS
5
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the hubs.
3
Page 4
Consumer Information
• Please keep this instruction sheet for future reference, as it contains
important information.
• Adult assembly is required.
• No tools needed for assembly.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
PRINTED IN MEXICO K6670a-0920
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
4
Page 5
Decoration
Proper label application will help to
keep the labels looking their best!
• For best results, do not attempt to
apply a label more than once.
• Make sure the areas where the labels
will be applied are clean and dry. Wipe
this product with a clean, soft, dry cloth
to remove any dust or oils.
5
Page 6
Easy Conversion
PRESS
Walker-to-Wagon Wagon-to-Walker
PRESS
PRESS
• Press the buttons on the sides
of the handle and lift to remove
the base.
PRESS
• Press the buttons on the side of the
handle and “snap” the handle into
the hubs.
PRESS
PRESS
PRESS
PRESS
• Press the buttons on the side of
the handle and lift to remove from
the hubs.
PRESS
PRESS
• Press the buttons on the side of
the handle and “snap” the handle
into the base.
6
Loading...