Fisher-Price K5450 Instruction Sheet

™

K5450-0920

Giant “O” Race Set

INSTRUCTIONS

Keep these instructions for future reference as they contain important information.

Requires 2 or 4 “D” size alkaline batteries (not included).

LEFT CURVE PIECE

CENTER CURVE PIECE

INSTRUCTION SHEET

SPECIFICATIONS

Toy:

Toy No.:

Part No.:

Trim Size:

Folded Size:

Type of Fold:

# colors:

Colors:

Paper Stock:

Paper Weight:

EDM No.:

GIANT “0” RACE SET™

K5450

0920

21"W x 21" H

14"W x 7" H

4-fold

One

Black

COMIC

003

FRONT

TRACK STRIP

TRACK CONNECTOR

TRACK STRIP

TRACK CONNECTOR

TRACK STRIP

RIGHT CURVE PIECE

TRACK STRIP

TRACK CONNECTOR

TRACK STRIP

RIGHT CURVE PIECE

CENTER CURVE PIECE

Assembly:

Make 180° curves.

LEFT CURVE PIECE

LEFT SIDE

RIGHT SIDE

TRACK STRIP

TRACK CONNECTOR

Set up the Giant "O" Race Set™ track set.

Spread out all the contents and match the parts to the layout shown. Follow the instructions to assemble each part.

Get track ready. Join track pieces.

ROAD SURFACE

FIT SIDES OF TRACK OVER SIDES OF CONNECTORS

WALL

MIDDLE SLOT

Make two sets of 180° curves.

Shape each section for best racing action! Road surface should curve down slightly toward middle lane. Walls should stand straight up and down.

CENTER CURVE

SIDE CURVE

Click

To shape each section:

Hold section right side up. Roll it up lengthwise until the walls touch each other. Slide hands down length of section, squeezing as you go.

TRACK

CONNECTOR

MIDDLE TABS

TRACK

Push middle tabs into middle slots of track first. Now push the track connector’s outer slots into the track.

Push connector into other side of the track as shown. Push the two track sections together firmly so there is no space between the tracks and the connector.

Fit left curve piece and center curve piece together.

Firmly push center curve piece connectors into side curve connectors.

NOTE: Assemble both left and right curve assemblies first before continuing.

Be sure all three connectors snap together by firmly pressing the two track connectors together.

Push in on walls until they stand straight up and down. To store strip sections keep each section as flat as possible.

SIDE SLOT

MIDDLE SLOT

SIDE SLOT

Add track sections to curves.

Set up JUICE MACHINE™ recharger

SIZZLERS

car

456

Apply labels as shown.

FIT SIDES OF TRACK OVER TABS ON SIDES OF CURVE

LONGEST

CURVE CONNECTOR

TAB

LABELS

SLOTS

CURVE CONNECTORS

CURVE

FOR BEST RESULTS, LET SIZZLERS® CAR GO FREE-WHEELIN' ON SMOOTH, HARD FLOORS!

TO OPERATE SIZZLERS® CAR: Use a GOOSE PUMP™ or JUICE MACHINE™ recharger. Power cell recharges for the life of the car!

IMPORTANT - To stop motor always set switch to OFF position. Never hold rear wheels to stop motor.

CONTENTS

RIGHT CURVE (2)

LEFT CURVE (2)

Starting with the longest curve connector, slide the track slots ALL THE WAY onto the curve connectors.

How to play

Insert power nozzle into intake pipe on side of the car as shown.

NOTE: Switch on bottom of car can be set at ON or OFF.

POWER NOZZLE

INTAKE PIPE

How to charge: Slide switch on bottom of

car to OFF position. Push power nozzle all the way into intake pipe of car. Never wiggle power nozzle when it is in the car.

Push top of JUICE MACHINE™ recharger down. Hold it down for 90 seconds to give your car a full charge.

I = ON / O = OFF

TAB

Turn the JUICE MACHINE™ recharger around. Press tab and pull door down. Insert 2 or 4 “D” size alkaline batteries (not included) following diagram on door.

NOTE: If you use 2 batteries, stack one on top of the other. If you use 4 batteries, you will have more races without a battery change. For best performance and battery life use only alkaline batteries.

STORE JUICE MACHINE™ RECHARGER - Remove batteries to prevent leakage.

HOW LONG SHOULD I CHARGE? When car is new or has not been used for a few days it

needs a warm-up. Give the car a good charge, about 90 seconds. Run car until it needs recharging. Repeat warm-up 4 or 5 times. Now the car will run longer between charges.

When car is starting a race give the car a good charge, about 90 seconds. (When charging more than one car for a race, turn the first one OFF while charging the other ones; this gives all cars a fair start.)

In the middle of race give car just enough charge so it

will finish first! Winners keep their stops as short as

possible.

NOTE: Never give your SIZZLERS® car more than

one full 90 second charge at a time. NEVER put books or other objects on top of the JUICE

MACHINE™ recharger.

TRACK TIPS FOR BEST RACE ACTION

Squeeze in ends of track at each connection. Spread out opposite ends as shown.

SQUEEZE ENDS OF TRACK LEADING IN TO CURVE

SPREAD ENDS OF TRACK LEADING POT OF CURVE

LABEL SHEET

TRACK CONNECTOR (4)

CENTER CURVE (2)

JUICE MACHINE™ recharger

SIZZLERS

car

TAPE

On waxed or very smooth floors you may improve racing performance by taping the curves in place.

TAPE

RACE EACH OTHER

(6)

Battery Safety Information

In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the product before being charged (if designed to be removable).

• Rechargeable batteries are only to be charged under adult supervision (if designed to be removable).

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the product.

• The supply terminals are not to be short-circuited.

• Dispose of battery(ies) safely.

• Do not dispose of this product in a fire. The batteries inside may explode or leak.

Protect the environment by not disposing of this product with household

waste (2002/96/EC). Check your local authority for recycling advice and

facilities.

CONTAINS NICKEL CADMIUM BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.

Ni-Cd

© 2006 Mattel, Inc. All Rights Reserved. Mattel, Inc., 333 Continental Blvd., El Segundo, CA 90245 U.S.A. Consumer Relations (800) 524-8697 service.mattel.com. Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at 1-800-524-8697.