Fisher-Price K4191, K4189 Instruction Sheet

BATTERY INSTALLATION:

ON / OFF

switch

USB port

Try-me

pull tab

Reset button

Open up fabric fastener seam in bottom of body to expose
battery compartment. Unscrew and lift cover away.
Replace batteries as shown.
Batteries included are for demonstration
purposes only.
For longer life use only alkaline batteries.
Requires 4 “AA” (LR6) batteries.

Protect the environment by not disposing
of this product with household waste
(2002/96/EC).
Check your local authority for recycling
advice and facilities (Europe only).

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin
your toy (product). To avoid battery leakage:

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the toy before being charged (if designed to be
removable).

•

Rechargeable batteries are only to be charged under adult supervision (if designed to be removable).

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the toy.

• The supply terminals are not to be short-circuited.

• Dispose of battery(ies) safely.

• Do not dispose of this toy in a fire. The batteries inside may explode or leak.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Mattel Inc. 333 Continental Blvd. El Segundo, CA [phone]
NOTE: Changes or modifications not expressively approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause

undesired operation.

Please keep these instructions for future reference as they contain important information.

BEFORE YOU BEGIN

INSTRUCTIONS

Open the fabric seam fastener on the bottom of the Puppy to gain access to the battery
compartment, the ON/OFF switch, the “Try Me” pull-tab, the RESET button, and the USB port.

Fabric seam

fastener

Remove and discard the “Try Me” pull-tab from the puppy for normal play function.
Once the TRY ME pull tab is removed, the toy will perform its full play pattern as described below.

Be sure the ON/OFF switch is in the ON position.
The ON/OFF switch is also located next to the battery compartment.

NOTE: Under certain conditions, the puppy can lose memory or stop functioning properly due to
static electricity. If this occurs, reset by (1) opening the battery door, then (2) removing &
re-inserting the batteries. If this does not work, reprogram the puppy by re-attaching the USB
cable and performing another download.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
PRINTED IN CHINA. Manufactured for Fisher-Price.
© 2007 Mattel, Inc. All Rights Reserved.
Fisher-Price and the Fisher-Price logo are U.S. trademarks of Mattel, Inc.
Packaging and address should be retained for future reference:
Mattel Canada Inc., Mississauga, Ontario L5R 3W2.
You may call us free at 1-888-892-6123.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB.
Helpline 01628500303.
Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, 13th Floor,
Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ.
Tel:[phone], Fax:[phone].
Mattel, Inc., 333 Continental Blvd., El Segundo, CA 90245 U.S.A.

IMPORTANT!

If you continue to experience trouble
programming your Knows Your Name doll,
DO NOT RETURN THE PRODUCT TO
THE STORE. We’re just a phone call away.
Call our consumer affairs hotline toll free at
1-888-892-6123.

K4189 Asst.

TM

ID. K4189-09 20-G2

HOW TO PERSONALIZE YOUR PUPPY

ON / OFF

switch

USB port

Try-me

pull tab

Reset button

Personalizing your Puppy is as simple as three easy steps:

i. INSTALL THE PROGRAM

1. Insert the included CD-ROM into your computer’s CD drive.

2. The InstallShield Wizard screen will appear and you will be asked if you want to install.

Click NEXT to begin the installation.

3. If the InstallShield Wizard screen does NOT appear, double-click on the MY COMPUTER icon

on your desktop. Next, double-click on your CD-ROM icon (usually drive “D”) to open the
InstallShield Wizard.

4. Follow the on-screen instructions to complete the installation.

NOTE: Installation time will vary depending on the computer used.
It may require up to 15 minutes,

5.

Once the installation is complete, you will have a puppy icon on your desktop.
You can now remove the CD-ROM from your disc drive.

ii. TYPE IN YOUR SETTINGS

1. Double-click on the PUPPY icon on your desktop to start the personalization program.

2. Follow the instructions on the screen to input:

so please be patient.

*Your Puppy’s Name*Your Child’s Name

HOW TO PLAY

As well as knowing your child’s name and his or her own name, your puppy knows when it is being
fed and groomed. There are 3 places you can touch or press to activate your puppy’s motions,
sounds & phrases:

1. Top of puppy’s head: Pet or scratch puppy on the top of his head or brush puppy’s head with
the brush.

2. Puppy’s back: Pet or scratch puppy’s back or brush puppy’s back with the brush.

3. Puppy’s mouth: Give puppy her bone.

NOTE: If you do not play with the puppy for 25 seconds or more, she will go to sleep to preserve
her batteries. Puppy can be woken up from sleep by pressing any one of the three activation
points.

HOW DOES PUPPY GROW?

Your puppy is going to go through 4 stages of growth before he or she is fully grown.

Stage 1: Once you remove the TRY ME pull tab, your puppy is ready to grow to stage 1.

Simply press any of the activation points 2 times.

Stage 2: After one full day, your puppy is ready to grow to stage 2.

Again, press any of the activation points 2 times.

3. Once you have input your child’s name and your puppy’s name, you are ready to download the
information to the puppy.

iii. DOWNLOAD TO THE PUPPY

1. Connect the puppy to your
computer using a USB A to USB B
cable (not included).

2. If this is your first time connecting the
puppy to your computer, the computer
will detect new hardware. Please wait for this
process to complete before proceeding to the next step.

3. Click the download button on the download screen.

4. Wait until the download is complete before disconnecting
the USB cable from the puppy.
The download can take 2-3 minutes – please be patient.

5. Once the download is complete, disconnect the USB cable.
NOTE: You can change your names at any time by
reconnecting the puppy to your computer, clicking the icon,
changing the settings, and then performing another download.

Your puppy is now ready for play!

USB A to

USB B cable

Stage 3: After another full day, your puppy is ready to grow to stage 3.

Using the same process, press any of the activation points 2 times.

Stage 4: After another full day, your puppy is ready to grow to stage 4 (fully grown).

Again, press any of the activation points 2 times.

After two full days, you will be able to reset your puppy back to her original size. She will ask you to
pat her head. She will then ask you to pat her head again to confirm. If you choose not to reset,
you may press any of the other activation points to continue playing.

PARENTS: You can also reset the puppy back to his original size by pressing the RESET button
found next to the battery compartment. Simply press the RESET button once using the tip of a pen
or pencil. If the Puppy does not shrink upon pressing the reset button, press the button on the
puppy’s back, then press the reset button again. This should cause the puppy to reset back to his
original size.

MINIMUM SYSTEM REQUIREMENTS:

• CD-ROM Speed – 4x, 8x recommended

• USB – Version 1.1 or higher

• Hard drive space – 100 MB available

• Memory – 128 MB, 256 MB recommended

• CPU – 350 Mhz, 800 Mhz recommended

• Video Resolution – 800x600, 1024x768 recommended

• Video Color Depth – 256 colors or higher

• Operating System – Windows 2000, XP, Vista or higher

• User input – keyboard & mouse

• Adobe Flash Player 8 or above

NOTE: Installation time will vary depending on the computer used, but may require up to
15 minutes.