Fisher-Price M8743, K3795 User Manual
K3795
M8743
WARNING
PLEASE KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
www.fi sher-price.com.au
Consumer Information
WARNING
Prevent serious injury or death from falls or sliding out:
• Always secure child with the restraint belts until child is able to get in and out of
the product without help (about 2
child in the product.
• Never leave child unattended.
• Always secure the product on a chair using the bottom and back attachment
straps. Never use the product on a stool or bench that does not have a seat back.
• Only use upright position when child is capable of sitting upright unassisted.
Prevent serious injury or death:
• Do not use in motor vehicles.
1
/2 years old). The tray is not designed to hold
2
2
Consumer Information
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions if needed.
Never substitute parts.
• Please read these instructions before assembly and use of
this product.
• Adult assembly and setup is required. No tools needed for
assembly or setup.
• Product features and decorations may vary from photos.
• Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
• New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Care
Parts
Tray
Pad
• The pad, seat, seat back and straps may be wiped clean
using a mild cleaning solution and damp cloth. Do not
use bleach. Do not use harsh or abrasive cleansers. Rinse
clean with water to remove residue.
• The tray is top rack dishwasher safe (or use the bottom
rack - without using the drying cycle).
To remove the pad:
• Push to remove the shoulder straps from the slots on the
waist restraint buckle.
• Lift the top of the pad off of the seat back.
• Fit the shoulder belts back through the slots in the pad.
• Unfasten the pad hooks from the front edge of the seat.
• Unbuckle the waist belts from the crotch belt.
• Fit the crotch belt down through the slot in the pad.
• Fit the waist belts back through the slots in the pad.
• Remove the pad from the seat.
• To replace the pad: refer to Assembly steps 2 - 6.
IMPORTANT! Never use this product without the restraint
system. Replace the crotch, waist and shoulder belts for
high chair use; replace the crotch and waist belts for
booster seat use.
Seat Back with Restraint System
Seat with Restraint System and Attachment Straps
3
Assembly
Seat Back
Ta b
Slot
Seat
Large Tab
Ta b
Slot
1
• Fit the seat back tabs into the slots in the top of the seat.
•
Push the top of the seat back so that the large tab “snaps”
into place in the seat.
Lowest Slots
Waist Belts
Crotch Belt
3
• Fit the waist belts on the seat through the lowest slots
in the pad. Make sure the waist belts are not twisted.
• Fit the crotch belt on the seat through the large slot
in the pad. Make sure the crotch belt is not twisted.
2
Pad
Hooks
4
• Fit the pad onto the seat.
• Fasten the hooks on bottom of the pad to the front edge
of the seat.
4
Loading...