Page 1
www.fisher-price.com
www.fisher-price.com
K0400
K0400
Page 2
Parts
A. Main Assembly
B. Building Top
C. Arch
D. Crane
E. T-Track
F. Straight Track
G. Curb
H. 4 Building Pieces
I. Brick Stack
J. Newspaper Stack
K. Bus
A
B
D EC
G
HF
x4
J KI
Page 3
Battery Installation
• Locate the battery compartment on the back
of the main assembly.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three “AA” (LR6)
We recommend the use of alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• When sounds or lights become faint or stop,
it’s time for an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for recycling
advice and facilities (Europe only).
Battery Safety Information
alkaline batteries.
1.5V x 3
“AA” (LR6)
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury
or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from
the toy. Dispose of batteries safely. Do not dispose of the product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Page 4
Assembly
1
MAIN ASSEMBLY
CURB
“Snap” the arch to the
main assembly.
“Snap” the main assembly
onto the curb.
2
ARCH
3
T-TRACK
STRAIGHT
TRACK
Fit the T-track onto the
straight track, as shown.
Page 5
Assembly
4
“Snap” the main
assembly on to the
track assembly.
CRANE
BUILDING TOP
5
“Snap” the building top and the
crane onto the main assembly.
FCC Statement
United States Only
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
Page 6
Bright Lights and
City Sounds
• Locate the power switch on the back of the toy.
• Slide the switch to
• When you are finished playing with this toy, slide the switch off
to turn the toy on.
.
• Press the button for brilliant
lights and sounds of the city.
• Turn the crank on the crane
and lift or lower the “bricks.”
• Rotate the crane for more
sounds and lights.
•
Load the “bricks” or
“newspapers” into a train
car (sold separately).
RC Vehicle sold separately.
Page 7
The more you collect,
the more fun it gets!
Woo-
Woo-
Wooooo!
Use multiple
remote control
Playsets and accessories sold separately and subject to availability.
vehicles
at once!
Wooooo!
Rhhhh!
Rhhhh!
Toot!
Toot!
Toot!
Toot!
Page 8
Visit www.fisher-price.com
to see the entire world of
GeoTrax® accessories!
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” (LR6)
Adult assembly is required.
Tool required for battery installation: Phillips screwdriver (not included).
Visit us on line at www.service.fisher-price.com.
Call our Consumer Relations Department, toll-free at 1-800-432-5437,
9 AM - 7 PM EST Monday through Friday and 11 AM - 7 PM EST Saturday.
Hearing-impaired consumers using TTY/TD equipment,
please call 1-800-382-7470.
Fisher-Price® Consumer Relations
636 Girard Avenue, East Aurora, New York 14052
alkaline batteries (not included).
Write to us at:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
GREAT BRITAIN:
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
PRINTED IN CHINA
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2006 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
K0400pr-0920
For countries outside the United States:
www.service.mattel.com.
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303; www.service.mattel.com/uk.
Consumer Advisory Service 1300 135 312.
Loading...