Fisher-Price J6546 Instruction Sheet
17
17
13
13
11
11
15
15
16
16
9
9
4
4
5
5
6
6
1
1
2
3
3
SHORT TRACK
LONG TRACK
CAR
CHOKING HAZARD
WARNING:
DIRECTION
TAPE
Helpful Tip:
This layout works best with
heavier or multiple cars if you
want to make the jump.
Battery Safety Information
In exceptional circumstances batteries may leak fluids that can cause
a chemical burn injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being
charged (if designed to be removable).
• Rechargeable batteries are only to be charged under adult supervision (if
designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
OPERATING TIPS
Adjust track side walls at each connection point as shown.
INSTRUCTIONS
Please keep these instructions for future
reference as they contain important information.
CONTENTS
®
J6546-0920G1
5+
!
WARNING:
CHOKING HAZARD
–
Not for children under 3 years.
Small parts.
INSTRUCTION SHEET
SPECIFICATIONS
PHX WILDCAT STARTER SET
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
16.8" W x 9.5" H
J6546
0920G1
4.2" W x9.5" H
4 PANEL
1
Black
White Offset
70 lb.
005
2
TRESTLES
TROUBLESHOOTING TIPS:
TABS ON INSIDE
CAR
DIRECTION
CAR
DIRECTION
To ensure car travels
smoothly through track
sections, adjust tabs as
shown. This prevents car
from hitting track edges.
2 MORE WAYS TO PLAY!
TABS ON OUTSIDE
CAR
DIRECTION
TO STABILIZE SET: On carpet, use books. On smooth floor,
tape base to surface.
TAPE
© 2006 Mattel, Inc. 333 Continental Blvd., El Segundo, CA 90245 U.S.A. All Rights Reserved. Consumer Relations
1-800-524-8697. service.mattel.com Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline
01628500303 Mattel Australia Pty Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel
East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport &
Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort,
47410 PJ. Tel:03-78803817, Fax:03-78803867.
LABELS BRIDGE
TRACK
LONG
TRACK
SHORT TRACK
CURVE
HALVES
RAMP
CONNECTOR
BRIDGE
TRESTLES
TRESTLE
EXTENDERS
Requires 2 "D" alkaline batteries (not included).
LEFT
LEAD-INS
2 HOT WHEELS®
CARS
LABEL SHEET
MULTIPOSITION BASE
RIGHT
LEAD-INS
SNAP
CONNECTORS
151617181920
21
22
O
HIGH BANK
45
CURVES
CATCH RAMP
TRESTLE
BASES
CURVE
SUPPORTS
POWER
CHARGER®
BOOSTER
1 2 3 4 5 6
27
14 13
29
28
30
8
36
41
42
35
23
24
25
26
32
31
7
9
10
11
12
40
39
38
34
33
37
INSTALL BATTERIES:
Press in tab on battery door and pull upward to open
front of compartment. Insert two “D” size alkaline
1
batteries (not included) as shown. Close cover.
For longer life use only alkaline batteries.
Push fingers through
holes on bottom to
remove batteries.
SET UP LOOP AND BASE:
Snap together top part of loop
2
halves as shown.
Protect the environment by not disposing of this product
with household waste [2002/96/EC]. Check your local
authority for recycling advice and facilities.
TAPE
23
22
24
21
19
Snap connector into hole no. 17 of
multi-position base. Slide a short track piece
onto the connector until the connector
is in center of track.
30
20
27
3
32
4
5
6
16
15
APPLY LABELS BY NUMBER
AS INDICATED.
28
2
1
11
12
10
9
Slide catch ramp farther away
TAPE
from short track for more
challenging jumps!
SHORT TRACK
7
8
LONG TRACK
ADJUSTABLE BRIDGE
29
37
18
Experiment with different
positions on multi-position base
for more exciting action!
40
41
39
42
38
13
36
14
34
35
ON-OFF SWITCH
33
31
17
26
25
CURVE
SUPPORTS
Then insert snap connectors in
bottom slots as shown.
SNAP
CONNECTORS
Next, snap these connectors into
holes no. 7 and no. 11 as shown.
BUILD ADJUSTABLE BRIDGE
Snap trestle parts together to make
one 2-level and one 3-level column.
3
LOOP HALVES
SHORT TRACK
Insert the bridge track through the
bottoms of the columns as shown. This
becomes the adjustable bridge. Attach
catch ramp to lower column and short
track to higher column.
Insert 1 short track piece
onto the top loop and
the long track piece onto
the lower loop as shown.
This sub-assembly is
now ready to install
into rest of track
assembly.
BRIDGE TRACK
CATCH RAMP
(Center label on bridge track
before assembly.)
TRESTLES
MULTIPOSITION BASE
RAMP
CONNECTOR
Tape down or add books to
stabilize all curve supports
as indicated.
Loading...