Fisher-Price J6522 Instruction Sheet
www.fi sher-price.com
J6522
Product features and decoration
may vary from the photograph.
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires three "AA" batteries (included).
Tools needed for assembly: Phillips Screwdriver, Hammer and
Scrap Block of Wood (not included).
Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg).
IMPORTANT!
•
Please save all packaging material until assembly
is complete to ensure that no parts are discarded.
• If you are missing a part, please call toll-free
1-800-432-5437, rather than return this product
to the store.
•
Please wipe each part with a clean, dry cloth
before assembly.
• Some parts shown are assembled to both sides
of the trike.
Parts
CAUTION
This product contains small parts in its
unassembled state. Adult assembly is required.
#8 x 3/4" Screw – 6
Cap Nut – 2
Headlight
Cover
Fork
#8 x 3" Screw – 1
FASTENERS ACTUAL SIZE
Handlebar
Seat
Cap
Frame
Seat Retainer
Straight
Axle
2 Fork Covers
Pedal Axle
Pedal
4 Pedal Hubs
Front Wheel
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. PRINTED IN MEXICO
© 2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. J6522pr-0920
2
2 Rear Wheels
2 Hubcaps
Part Not Shown: Label Sheet
2 Covers
Assembly
Rear Wheel
(Indented Side Up)
Straight Axle
Cap Nut
Hubcap
(Peg Side Down)
Rear Wheel
(Indented Side Down)
Hubcap
(Peg Side Up)
Straight Axle
1
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Frame
Cover
Hubcap
3
Frame
Assembled
Rear Wheel
Scrap Block
of Wood
Cap Nut
Assembly Tool
BOTTOM VIEW
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
• Insert one of the tabs on a cover into a slot in the hubcap.
Push to snap the cover into place. Repeat this procedure to
attach the other cover to the other hubcap.
Hole
Straight Axle
2
BOTTOM VIEW
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
Hole
Pedal Hub
Pedal Axle
Slot
Ta b
Ta b
Pedal Hub
4
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs fit into the slot in each pedal hub.
3
Loading...