Fisher-Price I1097 Instruction Sheet

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

INSTRUCTION MANUAL

MODEL RC71097

For 1 player / Ages 8 and up

P/N 82363400 Rev.B

RADICA:

GAMESTER

™

This product is officially licensed by Microsoft Corporation. Microsoft, Xbox, and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries and are used under license from Microsoft.

Introduction

Congratulations on choosing the Gamester Vortex, the ultimate gamepad officially licensed for the Xbox video game system.

Contents

1 x Gamepad 1 x Instruction Manual

IMPORTANT !

Before using this product, read the Xbox Instruction Manual for safety, health and other information.

Product Features

1. Six action buttons offering eight-bit analog control (A, B, X, Y, Black and White).

2. Two triggers offering eight-bit analog control.

3. Two vibration feedback motors, one for low frequency forces, one for high frequency forces.

4. Two analog thumbsticks with integral momentary switches.

5. One eight-way digital directional pad.

6. Two digital menu navigation buttons (Back

and Start).

7. Two module expansion slots (Expansion slot A and Expansion slot B).

8. Xbox proprietary plug interface.

9. Inline Quick Release Connector.

10.Rubber coated handle grips.

Inline Quick Release Connector

The Inline Quick Release Connector is added to help protect your Xbox game console investment. It is designed to disconnect your gamepad from your console in the event that the gamepad is pulled upon with an unreasonable force.

During normal use, the Inline Quick Release Connector should always remain connected. Always use the console connector to disconnect the controller from the console.

Expansion Slots

The expansion slots are an integral part of your gamepad and are designed to add functionality and variety to your gaming experience.

Expansion Slot A (Upper slot). Supports the following modules: 8 MB Memory Unit, 16 MB Memory Unit and all future Xbox modules designed for use in Slot A.

Expansion Slot B (Lower slot). Supports the following modules: 8 MB Memory Unit, 16 MB Memory Unit and all future Xbox modules designed for use in Slot B.

TROUBLESHOOTING

The gamepad is not working.

• Make sure the gamepad connector plug is firmly connected to the Xbox controller port.

• Make sure the Inline Quick Release Connector is firmly connected.

• Reset your Xbox game console.

MAINTENANCE

• Handle this product carefully.

• Store this product away from dusty or dirty

areas.

• Keep this product away from moisture or

temperature extremes.

• Do not disassemble this product. If a

problem occurs, consult your warranty card for replacement instructions.

Please retain this for future reference.

Expansion slot A

Expansion slot B

Start

button

Back

button

Right

thumb

stick

Directional

Pad

White button

Black button

Left

thumb

stick

Y button

B button X button A button

Right

trigger

Left

trigger