Walk n Drive
Learning Car
Please keep this instruction sheet
for future reference, as it contains
important information.
Maximum weight:
19 kg. (42 lbs
For ages between
9 months and
3 years.
Requires three “AA”
batteries (included).
Adult assembly is required.
Tool required for
battery replacement:
Phillips screwdriver
(not included).
).
H8589
www.fisher-price.com/uk
Before Use
CAUTION
Please keep small parts such as plastic tabs out
of children’s reach. Throw the plastic tab away.
Note: A plastic tab is attached to the toy for in-store demonstration
purposes. While the tab may have already been removed,
check the dashboard to be sure. If the plastic tab is still attached,
pull and remove the tab from the toy. Throw the plastic tab away.
Parts
Base
Front Wheels
Dashboard
Hood
Not Shown: Label Sheet
2
2 Caster Wheels
3 Shape Sorter Blocks
Front Wheels
Assembly
Dashboard
1
Bottom View
• Place the base upside down on a flat surface.
• “Snap” the front wheels to the underside of the base,
as shown.
Caster Wheels
2
3
• Insert and “snap” the dashboard into the base,
as shown.
Hint: This may require some force.
• Pull up on the dashboard to be sure it is secure to the base.
Hood
4
• Insert and “snap” the caster wheels into the base,
as shown.
Hint: This may require some force.
• Pull up on the caster wheels to be sure they are secure to
the base.Turn the base over.
• Fit the peg on the left side of the hood into the matching
hole in the dashboard.
• Press to “snap” the other peg into the dashboard.
3