Fisher-Price H7062 User Manual

Care

• Wipe the toy with a clean cloth dampened with a mild soap and
water solution.

• Do not immerse the toy.

FCC Note (United States Only)

Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer

responsible for compliance could void the user’s authority to operate
the equipment.

Tumblin’ Sounds™ Goldfi sh

Press the tail - blocks
tumble out the mouth
with fun music!

For countries outside the United States:

CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;

www.service.mattel.com.

GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.

AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.

Consumer Advisory Service 1300 135 312.

NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.

ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

PRINTED IN CHINA H7062pr-0920

www.fisher-price.com

Drop blocks in here

Drop blocks in here

H7062

Consumer Information

Battery Replacement

• Please keep this instruction sheet for future reference, as it contains
important information.

• Requires three (LR44) button cell batteries (included).

• Adult assembly is required for battery replacement.

• Tool required for battery replacement: Phillips screwdriver (not included).

Questions? We'd like to hear from you!

Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470. Or, visit us on
line at www.service.mattel.com.

Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.

Before First Time Use

CAUTION

Please keep small parts such as the plastic tabs out of

children’s reach. Throw the plastic tab away.

Note: A plastic tab was attached to the toy for in-store demonstration
purposes. While the tab may have already been removed, check the
bottom of the toy to be sure. If the plastic tab is still attached, pull and
remove the tab from the toy. Throw the plastic tab away.

Recycle Information (U.S.A. ONLY)

If your product contains replaceable button cell batteries, please remove and
recycle the battery(ies). If the batteries in your product are not replaceable,
please recycle your product.

•

Visit your nearest recycling center. For the location of the nearest recycling
center, visit us online at www.service.mattel.com.

•

If a recycling center is not available in your area, contact us for a pre-paid
mailing label. Visit us online at www.service.mattel.com or call us toll-free,

1-800-432-5437.

Battery Compartment Door

When sounds from this toy become faint or stop, it is time for an adult to
change the batteries!

• Locate the battery compartment on the bottom of the toy.

• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door. Throw exhausted
batteries away.

• Insert three, new, button cell (LR44) alkaline batteries, as indicated inside
the battery compartment.

• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.

For best results, use

only alkaline batteries,

for longer battery life.

1.5V x 3

LR44 or Equivalent

SHOWN ACTUAL SIZE

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your
toy. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated on the battery compartment door.

• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Dispose of batteries safely. Do not
dispose of batteries in a fire. The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging.

• If removable, rechargeable batteries are used, they are only to be charged

under adult supervision.