Aquarium
H6318
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “D” (LR20) alkaline batteries for operation (not included).
An adult must install batteries and attach toy to crib.
Tool required for battery installation:
Phillips screwdriver (not included).
www.fi sher-price.com
Crib Attachment and Battery Installation
IMPORTANT! Always use the straps provided to attach this toy to a crib.
Note: If you are attaching this
toy to a crib side rail that can be
Attachment
Strap
Slot
Crib Rail
Button
Socket
Back View
1
lowered and raised, make sure
the crib side rail is in the raised
(locked) position whenever a child
is in the crib.
• Position the toy inside the crib so
that the socket fits between two
of the crib rails.
• Wrap one of the toy’s attachment
straps around the crib spindles.
• Fasten the attachment strap slot
to the button on the back of
the toy. This toy should be snug
against the crib rail and spindles.
Use the strap slot that provides
the tightest fit.
• Repeat this procedure to secure
the other attachment strap.
2
Crib Attachment and Battery Installation
WARNING
To prevent entrapment of baby’s head, keep distance
between the bottom of the product and the crib
mattress to at least 7 inches.
• If the distance between the toy
2
and the mattress is less than
7 inches: readjust the attachment straps to lift the product;
or lower the crib mattress.
Bottom
of Toy
At least
7 inches
Mattress
3