Fisher-Price H5556, 72408 User Manual

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

PRINTED IN MEXICO 72408e-0920

Consumer Information

Grow to Pro Basketball

Product features and decoration may vary from the photograph above.

Please keep this instruction sheet for future reference, as it contains important information.

Adult assembly is required.

Tool required for assembly: Phillips Screwdriver (not included).

Water or sand to fill base (not included).

IMPORTANT! Rim height should be adjusted only by an adult.

Model Numbers: 72408, H5556

Questions? We’d like to hear from you!

Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-KIDS (5437), 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.

Or, write to: Fisher-Price®Consumer Relations 636 Girard Avenue East Aurora, New York 14052, U.S.A.

For countries outside the United States:

CANADA

Questions? 1-800-567-7724, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

GREAT BRITAIN

Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.

AUSTRALIA

Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.

NEW ZEALAND

16-18 William Pickering Drive, Albany 1331, Auckland.

ASIA

Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Collar

Backboard

Ball

Rim

Lower Post

Upper Post

Note: Label not shown.

Plug

Base

Net/Ring Assembly

#6 x 5/8" Screw - 4

SHOWN ACTUAL SIZE

Hint: Some parts were placed inside the lower post for shipping.

Parts

Side Edge

• Bend the “T” end of the plug and insert it into the hole in the base.

Note: After assembly is complete, fill the base with water or approximately 50 lbs. of sand (water and sand not included) to keep this product stationary. Simply lift the plug, fill the base, and replace the plug.

Proper label application will help to keep the label looking its best!

•Wash your hands before applying the label.

• Make sure the area where the label will be applied is clean and dry. Wipe the backboard with a clean, soft, dry cloth to remove any dust or oils.

•For best results, avoid applying the label more than once.

•Peel the backing from one half of the label. Do not remove all of the backing!

• Align the side edge of the label (where backing is removed) with the side edge of the label area on the backboard.

• Carefully apply the side edge of the label to the side edge of the label area on the backboard.

•While rubbing the label in place, continue to peel the backing from the other half of the label.

• After applying the label, rub the label firmly with a cloth to make sure the label is adhered to the backboard.

• Dispose of the label backing properly.

Backboard

Assembly

Side Edge

Plug

“T” End

Base

• Place the loops at the top of the net into the grooves on the ring.

• Pull each loop through a ring tab, as shown.

Hole

Rectangular Tabs

Hole

Rim

Hole

Net Assembly

• Place the rim on a flat surface with the rectangular tabs facing up.

• Locate the four screw holes on the underside of the net assembly.

• Align the four screw holes on the underside of the net assembly with the four holes in the rim.

• Place the net assembly onto the rim.

Groove

Ring

Ring Tab

Groove

Ring Ta b

This product contains small parts

in its unassembled state.

Adult assembly is required.

CAUTION

+ 2 hidden pages