Fisher-Price H3451 Instruction Sheet

™

INSTRUCTIONS

Please keep these instructions for future reference as they contain important information.

Personalizing your KNOWS YOUR NAME doll is as simple as three easy steps:

i. INSTALL THE PROGRAM

1. Insert the POOH KNOWS YOUR NAME CD into your CD-ROM drive.

2. The InstallShield Wizard screen will appear and you will be asked if you want to install.
Click NEXT to begin the installation.

3. If the InstallShield Wizard screen does NOT appear, double-click on the MY COMPUTER icon on your desktop.
Next, double-click on your CD-ROM icon (usually drive “D”) to open the InstallShield Wizard.

4. Follow the on-screen instructions to complete the installation.
NOTE: Installation can take up to 15 minutes depending on the computer used – please be patient.

5. Once the installation is complete, you will have a Pooh Knows Your Name icon on your desktop.
You can now remove the CD-ROM from your disc drive.

ii. PERSONALIZE YOUR SETTINGS

1. Double-click on the POOH KNOWS YOUR NAME icon on your
desktop to start the personalization program.

2. Follow the instructions on the screen to input your information
in the following areas:

Personalize

•
Songs, Stories & Games

•
Daily Planner

•

iii. DOWNLOAD TO THE DOLL

1. Connect your USB cable to both the Pooh doll and your
computer. If this is your first time connecting the doll to your
computer, the computer will detect new hardware.
Please wait for this process to complete before proceeding with
the download.

2. Once you have input all your personal information, click the
download button on the main screen.
NOTE: The download button will not appear until you have
gone through all the personalization screens.

3. Wait until the download is complete before disconnecting the
USB cable from the doll.
NOTE: The download can take 2-3 minutes – please be patient.

4. Once the settings are downloaded to the doll, you can
disconnect the USB cable.

Your POOH KNOWS YOUR NAME doll is now ready for play!

HOW TO PLAY

Be sure the ON/OFF switch is in the ON position. The ON/OFF switch is located on the battery box, under the fabric

•
fastener.

Press the dollʼs hand or tummy to activate phrases, songs, stories and games.

•
Your KNOWS YOUR NAME doll will also speak randomly at selected times of the day based on the settings you input.

•

MINIMUM SYSTEM REQUIREMENTS:
CD-ROM Speed - 4x, 8x recommended
USB - Version 1.1 or higher
Hard drive space - 250 MB, 500 MB recommended
Memory - 128 MB, 256 MB recommended
CPU - 350 Mhz, 800 Mhz or above recommended
Video Resolution - 800x600, 1024x768 recommended
Video Color Depth - 256 colors or higher
Operating System - Windows 2000, XP or higher
User Input - keyboard & mouse

NOTE: Installation time will vary depending on the
computer used, but may require up to 15 minutes.

1

CHANGING YOUR SETTINGS

To change any of the settings in your doll, simply:

1. Reconnect the doll to the computer using the USB cable.

2. Double-click on the KNOWS YOUR NAME icon on your desktop. You do not need to re-insert the CD-ROM into

the disc drive.

3. Follow the instructions on your screen to change any of the settings.

4. Download the new settings to your doll by clicking the download button.

NOTE: For additional instructions, refer to the HELP section on your CD-ROM.

2

1

BATTERY INSTALLATION:

Open up fabric fastener seam in back of body to expose
battery compartment. Unscrew and lift cover away.
Replace batteries as shown.
Batteries included are for demonstration purposes only.
For longer life use only alkaline batteries.
Requires 3 “AA” (LR6) batteries.

3 “AA” BATTERIES

ON / OFF Switch

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak
fluids that can cause a chemical burn injury or ruin
your toy (product). To avoid battery leakage;

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the
toy before being charged (if designed to be
removable).

• Rechargeable batteries are only to be charged
under adult supervision (if designed to be
removable).

• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as
recommended are to be used.

• Batteries are to be inserted with the correct
polarity.

•

Exhausted batteries are to be removed from the toy.

• The supply terminals are not to be short-circuited.

• Dispose of battery(ies) safely.

• Do not dispose of this toy in a fire. The batteries
inside may explode or leak.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Mattel Inc. 333 Continental Blvd. El Segundo, CA [phone]
NOTE: Changes or modifications not expressively approved by the manufacturer responsible for
compliance could void the userʼs authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause

undesired operation.

© Disney
Based on the “Winnie the Pooh” works
by A.A. Milne and E.H. Shepard.
Visit the Disney website at
www.Disney.com

H3451-0920

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
PRINTED IN CHINA. Manufactured for Fisher-Price.
© 2005 Mattel, Inc. All Rights Reserved.
Fisher-Price and the Fisher-Price logo are U.S. trademarks of Mattel, Inc.
Packaging and address should be retained for future reference:
Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at 1-800-432-5437.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303.
Mattel Australia Pty., Ltd., Richmond, Victoria 3121 - Consumer Advisory Service 1300 135 312.
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Diimport & Dieadarkan Oleh: Mattel SEA Ptd Ltd.(993532-P)
Lot 13.5, 13th Floor, Menara Lien Hoe,
Persiaran Tropican Golf Country Resort, 47410 PJ.
Tel:[phone], Fax:[phone].
Mattel, Inc., 333 Continental Blvd., El Segundo,
CA 90245 U.S.A. Consumer Affairs 1 (800) 524-Toys.

service.fisher-price.com

Questions?

In US and Canada

1-888-892-6123

Item : H3451-0920
Version : English
Size : 148 x 210 mm
Paper : Woodfree Paper 80 gsm
Color : Black