(not included); Assembly Tool (included). Use
only with a Power Wheels
®
12 Volt Lead Acid
Rechargeable Battery and Power Wheels
®
12 Volt Charger with Type 12V Connector
(both included). Requires four "C" (:LR4) alkaline
batteries for FMRradio/Simulated CD Player/Digital
Clock/Microphone operation.
Owner's Manual
with Assembly
Instructions
For Model H04
Product features may vary
from the picture above.
CUS
TO
M EDITIO
®
Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems
and vehicle body designs are General Motors Trademarks used under
license to Fisher-Price.
®
CUS
CUSTOM EDITION
Tools needed for assembly: Phillips Screwdriver
Tools needed for assembly: Phillips Screwdriver
(not included); Assembly Tool (included). Use
(not included); Assembly Tool (included). Use
only with a Power Wheels
only with a Power Wheels® 12 Volt Lead Acid
Rechargeable Battery and Power Wheels
Rechargeable Battery and Power Wheels
12 Volt Charger with Type 12V Connector
12 Volt Charger with Type 12V Connector
(both included). Requires four "C" (:LR4) alkaline
(both included). Requires four "C" (LR14) alkaline
batteries for FMRradio/Simulated CD Player/Digital
batteries for FM Radio/Simulated CD Player/Digital
TO
M EDITIO
Please read this manual and save it
Please read this manual and save it
with your original sales receipt.
with your original sales receipt.
12 Volt Lead Acid
Clock/Microphone operation.
Clock/Microphone operation.
N
®
Product features may vary
Product features may vary
from the picture above.
from the picture above.
Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems
Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems
and vehicle body designs are General Motors Trademarks used under
and vehicle body designs are General Motors Trademarks used under
• Your new vehicle requires adult assembly. Please set aside at least
60 minutes for assembly.
• You must charge your battery for 18 - 30 hours before you use your vehicle for the first time. We recommend that you start charging
your battery before beginning assembly. Please see Battery Charging
beginning on page 8 for detailed instructions.
• Read this manual carefully for important safety information and
operating instructions before using your vehicle. Keep this manual
for future reference as it contains important information.
• This vehicle is designed for use on: grass, asphalt and other hard
surfaces; on generally level terrain; and by children 3 years of
age and older.
• Make sure children know and follow these rules for safe driving
and riding:
- always sit on the seat.
- always wear shoes.
- only 2 (two) riders at a time.
• Use this vehicle ONLY outdoors. Most interior flooring can be
damaged by riding this vehicle indoors. Fisher-Price® will not be
responsible for damage to the floor if the vehicle is used indoors.
• To prevent damaging the motors and gears, teach your child to
stop the vehicle before switching direction. Do not tow anything
behind the vehicle or overload it. Do not exceed the maximum
weight capacity of 130 lbs (59 kg).
IMPORTANT INFORMATION
• This vehicle has adjustable play seat belts. Please note that the
adjustable seat belts are designed to be a play feature only and do
not function as protective safety restraints.
• For safety reasons, your vehicle has been pre-set so that it will only
operate at low speed. You must remove the high speed lock-out
screw to allow operation of the vehicle at high speed. Please
see page 26 for detailed instructions.
• If you have any questions about your Power Wheels® vehicle,
please call our toll-free service lines at 1-800-348-0751 from
8 AM to 6 PM (EST) Monday through Friday. Trained customer
service representatives are available to take your call in English
or French. Habla Español? Si usted tiene alguna pregunta ó
necesita asistencia llame gratis 1-800-348-0755 para los Estados
Unidos. Tenemos representantes que hablan español para atender
su llamada.
• For your convenience, Power Wheels® maintains an independently owned and operated Authorized Service Center Network with more
than 400 authorized service centers nationwide. Our authorized
service centers will repair or replace parts under warranty at no extra
charge, and can perform non-warranty repairs for a minimal charge.
To find the authorized service center nearest you, please visit us
on-line at www.powerwheels.com or call 1-800-348-0751.
• To register your vehicle, please visit us on-line at
www.powerwheels.com.
2
2
H4433pr-0920
H0440pr-0920
WARNINGS AND CAUTIONS
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only. A child
could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or the
battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
®
components in products other than Power Wheels® vehicles could
B
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, cars, steep inclines, roads and alleys.
CAUTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
H0440pr-0920
H4433pr-0920
3
C
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product
to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
2 Doors
(Left and Right)
Vehicle
Seat
Front End
Windshield/Dash
Bumper
4
Grille
Hood
H0440pr-0920
H4433pr-0920
Steering Column
PARTS
C
2 Front Wheels
(Left and Right)
Steering Wheel
Speaker Box
Assembly
2 Headlights
(Left and Right)
2 Wheel Covers
2 Wings
(Left and Right)
2 Door Plates
H0440pr-0920
2 Taillights
(Left and Right)
2 Bushings
2 Hubcaps
5
C
PARTS
12 Volt Battery
2 Short Seat Belts
Long Seat Belt
Assembly Tool
7
/16" Washer – 2
#8-32 Lock Nut – 1
#6 x 11/2" Screw – 1
12 Volt Charger
3
/8" -16 Lock Nut – 2
#8-32 x 3/4" Screw – 1
#8 x 3/4" Screw – 36
6
Key Assembly
1/4 x 11/4" Screw – 2
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Fasteners Shown Actual Size
H0440pr-0920
PARTS DIAGRAM
Note: Some parts shown are assembled on both sides of the vehicle.
D
20
11
10
19
13
22
9
11
12
25
8
7
4
1
Vehicle
2
Front End
3
Bumper
4
Grille
5
Headlights - 2
6
Doors - 2
7
Hood
8
Windshield/Dash
9
Door Plates - 2
5
26
10
Seat
11
Short Seat Belts - 2
12
Long Seat Belt
13
Wings - 2
14
Front Wheels - 2
15
Wheel Covers - 2
16
Hubcaps - 2
17
Bushing - 2
18
7/16" Washers - 2
2
1
3
19
Speaker Box Assembly
20
Steering Wheel
21
Steering Column
22
Taillight - 2
23
12 Volt Charger
24
12 Volt Battery
25
Key Assembly
26
Assembly Tool
21
24
18
17
14
3
/8"-16 Lock Nuts - 2
#8-32 x
#8-32 Lock Nut - 1
#6 x 1
3
/4" Screw - 1
1
/2" Screw - 1
15
Parts Not Shown
1
/4" x 11/4" Screws - 2
#8 x
Label Sheet
16
3
/4" Screws - 36
6
23
H0440pr-0920
7
E
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child
if vehicle tips over. Always use battery
retainer.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting
in serious injury.
- Use of Power Wheels
products other than Power Wheels
vehicles could cause overheating, fire
or explosion.
• The battery must be handled by adults only.
The battery is heavy and contains sulfuric
acid (electrolyte). Dropping the battery
could result in serious injury.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If
damage or excessive wear is detected, do
not use the charger or the battery until you
have replaced the worn or damaged part.
®
components in
®
CAUTION
Use the charger in dry locations only.
About Thermal Fuses
Your Power Wheels 12 volt battery is equipped with a built-in
thermal fuse. The thermal fuse is a self-resetting safety device which
automatically “trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too severe. Once a
fuse has “tripped”, it will automatically reset itself after approximately
25 seconds and allow the vehicle to resume normal operations.
To avoid repeated automatic shut-downs, do not overload the vehicle
by exceeding the 130 lbs (59 kg) maximum weight capacity or by
towing anything behind the vehicle. Avoid severe driving conditions,
such as driving up slopes or running into fixed objects, which can
cause the wheels to stop spinning while power is still being supplied
to the motors and make sure your child stops the vehicle before
switching speeds or direction.
If a thermal fuse in a battery continually trips under normal driving
conditions, please contact your local Power Wheels® Authorized
Service Center. For the location of the Authorized Service Center
nearest to you, visit us on-line at www.powerwheels.com,
or call 1-800-348-0751.
Important Notes
• Your new battery must be charged for at least 18 hours before
you use it in your vehicle for the first time.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
• Before charging the battery, examine the battery case for cracks
and other damage which may cause sulfuric acid (electrolyte) to
leak during the charging process. If damage is detected, do not
charge the battery or use it in your vehicle. Battery acid is very
corrosive and can cause severe damage to surfaces it contacts.
• Do not charge the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
charge your battery.
• Use only a Power Wheels® 12 volt charger with "12V" connector
(120 VAC, 60 Hz, 28W with an output of 12 VDC, 1200 mA)
to charge your Power Wheels® 12 volt battery.
Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of fire,
electric shock or injury. In the event of any damage, do not use
the charger until the damage has been properly repaired. Please
call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave it in
the vehicle. Always remove a dead battery from the vehicle.
8
H0440pr-0920
E
BATTERY CHARGING
Battery
Connector
B
A
Charger
ASSEMBLY
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery, or
help in assembly of the vehicle.
F
• Plug the charger connector into the battery
• Plug the charger into a standard wall outlet
Note: If power flow to the wall outlet is controlled by a switch, make
sure the switch is “ON”.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, pull firmly on the charger connector
to disconnect it from the battery. Unplug the charger from the wall
outlet. The battery is now ready to be installed in your vehicle.
Please see the Battery Installation section on page 23 for detailed
instructions on installing your battery. If your battery is already
installed in your vehicle, simply re-connect the motor harness
connector to the battery. Close the hood.
A
.
B
.
Bushing
Front Axle
7
/16" Washer
1
• Slide a 7/16" washer onto a front axle.
• Fit a bushing (flat side first) onto the front axle.
• Repeat this procedure to assemble the other 7/16" washer and
bushing to the other front axle.
RIGHT SIDE VIEW
H0440pr-0920
H4433pr-0920
9
F
ASSEMBLY
Front Axle
3
/8"-16 Lock Nut
Front Wheel
2
Hint: There is a right and a left front wheel. Place the right wheel
(marked R) on the passenger side of the vehicle, and the left wheel
(marked L) on the driver side of the vehicle.
• Place a front wheel onto each front axle.
Wheel Cover
4
• Place a 3/8"-16 lock nut (rounded side out) onto a front axle.
IMPORTANT: Tighten the lock nut firmly using the closed end of the
assembly tool.
• Repeat this procedure to fasten the other front wheel assembly with
the other 3/8"-16 lock nut.
Assembly Tool
3
• Fit a wheel cover onto each front wheel.
10
Front Wheel
Hubcap
Wheel
Cover
5
• Align the slot in a hubcap with the rib in the wheel cover. "Snap" a
hubcap into the center of each wheel cover.
H0440pr-0920
Front End
ASSEMBLY
F
Battery
Compartment
Vehicle
6
• Fit the front end onto the vehicle.
• Insert the tabs on the back edge of the front end into the slots in
the vehicle.
Front End
8
• Insert two 1/4" x 11/4" screws inside of the battery compartment and
into the front end of the vehicle. Tighten the screws.
TOP VIEW
Front End
7
• Insert two #8 x3/4" screws through the front end and into the
vehicle. Tighten the screws.
H0440pr-0920
9
• Fit the bumper onto the front end.
RIGHT SIDE VIEW
Bumper
H4433pr-0920
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.