Fisher-Price G5912 User Manual

w

w

w

.

f

i

s

h

e

r

-

p

r

i

c

e

.

c

o

m

Please read these instructions before assembly and use of this product.

Adult assembly is required.

Tool needed for battery installation: Phillips Screwdriver (not included).

Requires four LR14 alkaline batteries for operation (not included).

Weight Limit: 9 kg (20 lbs).

Product features and decorations may vary from picture above.

G5912

IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.

WARNING

2

To prevent serious injury or death
from falls and being strangled in
the restraint system:

- Always use the restraint system.

- Not recommended for children
who can sit up by themselves
(6 months approximately, until
9 kg, 20 lbs).

• Never leave child unattended.

• It is dangerous to use this product
on an elevated surface.

WARNING

Warning and Caution

This package contains small parts

in its unassembled state.

Adult assembly is required.

CAUTION

Consumer Information

AUSTRALIA

Mattel Australia Pty.Ltd., 658 Church Street,Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.

NEW ZEALAND

16-18 William Pickering Drive,Albany 1331,Auckland.

ASIA

Mattel East Asia Ltd, Room 1106, South Tower,World Finance Centre,
Harbour City,Tsimshatsui, HK, China.

Mattel UK Ltd,Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500302.

3

Parts

3 Link Toys

Seat Back Tube

Pad

Front Tube

Lower Swing Arm Assembly

(with Restraint System)

Frame

2 Frame Tubes

Shown Actual Size

#6 x 1.9 cm Screws - 4

NOTE: Tighten and loosen all

screws with a Phillips screwdriver.
Do not over-tighten the screws.

4

Assembly

• Rotate the upper frame tube until it "snaps" into an upright
position, as shown.

IMPORTANT! Before assembly,inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions
if needed. Never substitute parts.

• Position the front tube so that the rubber feet are flat on
the surface.

• While pressing the button on the lower frame tube, insert it
into an end of the front tube. Continue to insert the lower
frame tube into the front tube until you hear a "click".

• While pressing the button on the front tube, insert it into
the end of the lower frame tube. Continue to insert the
front tube into the lower frame tube until you hear
a "click".

Upper Frame Tube

Press Button

on Front Tube

Press Button on

Lower Frame Tube

Rubber Feet Down

1 2

5

Assembly

• Pull the front tube to be sure it is secure to each lower
frame tube.

• While pressing the buttons on the upper frame tubes,
insert them into the holes in the underside of the frame.

• Continue to insert the upper frame tubes into the frame
until you hear a "click" on both sides.

Lower Frame Tubes

Pull Front Tube

Press Button

on Upper

Frame Tube

Frame

3

4

6

Assembly

• Check to be sure the upper frame tubes are secure in the
frame. If you can remove the upper frame tubes from the
frame, you have not properly inserted the tubes into the
frame. Remove the upper frame tubes from the frame and
repeat Assembly step 4.

• Fit the lower swing arm assembly to the outer side of the
upper swing arms.

FrameUpper Frame

Tub e

Upper Frame

Tub e

Lower Swing Arm Assembly

(with Restraint System)

Upper Swing Arms

5 6

7

Assembly

• Position the seat back tube so that it curves toward the back
of the swing.

• While pressing the buttons on the seat back tube, fit the
seat back tube into the short tubes on the swing arms.

• Push the seat back tube until it “clicks” into place.

• Pull up on the seat back tube to be sure it is secure to the

swing arms.

Seat Back Tube

Buttons

Swing Arm Short Tubes

7

8

• Insert two #6 x 1.9 cm screws through the upper swing arm
and into the lower swing arm. Tighten the screws.

Shown Actual Size

#6 x 1.9 cm Screws - 4

10

8

Assembly

• From behind the seat, insert the waist belts into the slots in
the pad.

• Push to fasten the restraint system to the pad.

Assembly is now complete.

SlotSlot

Waist Belts

Fastener

• Fit the top pocket on the pad over the seat back tube .

• Lift the seat bottom tube and fit the lower pocket on the

pad over the seat bottom tube .

9

Pad Top Pocket

Seat Back Tube

Pad Lower Pocket

Seat Bottom Tube





9

Battery Installation

1.5V x 4
LR14

SHOWN ACTUAL SIZE

Hint: We recommend using alkaline

batteries for longer battery life.

• Locate the battery compartment door on the frame.

• Loosen the screws in the battery compartment door.

• Remove the battery compartment door and the battery

holder from the battery compartment.

• Open the battery holder.

• Insert four LR14 alkaline batteries as indicated inside the

battery holder.

• Close the battery holder.

• Align the ridge on the battery holder with the groove in the

battery compartment.

• Slide the battery holder back into the battery compartment.

• Replace the battery compartment door and tighten

the screws.

Battery Compartment Door

Battery Holder

Battery Compartment Door

Battery Holder

1

2

3

Battery Holder

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different
types: alkaline,standard (carbon-zinc) or rechargeable
(nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always

remove exhausted batteries from the product. Dispose of
batteries safely.Do not dispose of batteries in a fire.The
batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type

as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product

before charging.

• If removeable, rechargeable batteries are used, they are
only to be charged under adult supervision.

Set-Up & Use

WARNING

IMPORTANT! Before each use, inspect this product for

damaged hardware, loose joints, missing parts or sharp

edges. DO NOT use if any parts are missing or broken.

Contact Mattel for replacement parts and

instructions if needed. Never substitute parts.

10

To prevent serious injury or death
from falls and being strangled in
the restraint system:

- Always use the restraint system.

- Not recommended for children
who can sit up by themselves
(6 months approximately, until
9 kg, 20 lbs).

• Never leave child unattended.

• It is dangerous to use this product
on an elevated surface.

11

Set-Up & Use

• Place your child in the seat. Position the crotch belt between
your child’s legs.

• Fasten the waist belts to the crotch belt. Make sure you
hear a “click” on both sides.

• Check to be sure the restraint system is securely attached by
pulling it away from your child.The restraint system should
remain attached.

Securing Your Child

To tighten the restraint straps:

• Feed the anchored end of the restraint strap up through

the buckle to form a loop . Pull the free end of the restraint
strap .

To loosen the restraint straps:

• Feed the free end of the restraint strap up through the buckle

to form a loop . Enlarge the loop by pulling on the end of
the loop toward the buckle. Pull the anchored end of the
restraint strap to shorten the free end of the restraint strap .

1

2

Waist Belt

Restraint

Waist Belt

Crotch Belt

Loosen

Anchored End

Free End

Tighten

Free End

Anchored End

12

Set-Up & Use

Power Dial

Power Dial

Starting the Swing

• Turn the power dial to any of eight settings.

• Give the seat a light push to start the swinging motion. Adjust the swing power dial to the desired swing motion setting.

Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on all settings.In most cases,
the low setting works best for a smaller child while the high setting works best for a larger child.

• If swinging stops while using a lower setting, try a higher setting.Give the seat a light push to start the swinging motion again.

• Be sure to turn this product off when not in use. Turn the power dial to the off setting .

Baby Activated

13

Set-Up & Use

Hint: Your baby can enjoy lights and music with or without swinging.

Parent Activated

• Slide the lights and music switch to:

When baby pulls either toy on the arch, one tune plays along with twinkling lights.

On this setting, six tunes (approximately 10 minutes) play along with dancing lights.

On this setting, music plays for about 10 minutes.

Turns lights and music off.

• Turn the volume dial to a comfortable listening level.

IMPORTANT! Low battery power may cause this product to operate erratically (no sounds/movement) and the product
may not turn off.Remove and throw away all four batteries and replace with four, new LR14 alkaline batteries.

Lights and

Music Switch

Volume Dial

Lights and

Music Switch

14

• Fit the link toys to either of the hanging toys on
the swing.

Room-to-Room PortabilitySet-Up & Use

• To prevent serious injury or death
from falls and being strangled in the
restraint system, always use the
restraint system.

• It is dangerous to use this product
on an elevated surface.

WARNING

• Make sure your child is properly secured in the swing seat.

• With baby facing forward and outward, lift the swing using

the handle.

• Carefully carry the swing to another room. Be sure to set the
swing down on a non-elevated, flat surface.

3 Link Toys

15

Take Along

• Lift the seat back and seat bottom together.

• Tip the swing backwards with the seat back down.

• Press both tabs on the frame at the same time to release the

frame base.

1

2

Lift Seat Bottom

Lift Seat Back

Seat Back

Press Tabs

Care

• The frame, pad, liner and toys may be wiped clean using a
mild cleaning solution and a damp cloth. Do not immerse
the frame.

• This product has no consumer serviceable parts.Do not
take this product apart.

IMPORTANT! Never use this product without the
provided pad.

Fisher-Price,Inc., a subsidiary of Mattel, Inc.,East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
© 2004 Mattel,Inc. All Rights Reserved. ® and ™ designate U.S.trademarks of Mattel, Inc. G5912pr-0726

• Rotate the lower frame tube around to the top of frame,
as shown.

To set the swing back up for use:

• Rotate the lower frame tube around until it snaps
into place.

• Place the swing on a non-elevated, flat surface.

3

Lower Frame Tube

Take Along