Page 1
Please keep this
instruction sheet for
future reference, as it
contains important
information.
Requires three “C” (LR14)
alkaline batteries
(not included).
Adult assembly
is required.
Tool required for
assembly: Phillips
screwdriver
(not included).
Jungle
Development
Mobile
™
G5776
Instructions
www.fisher-price.com
Page 2
• Possible entanglement injury, keep out of baby’s reach.
• Remove mobile from crib or playpen when baby begins
to push up on hands and knees.
WARNING
This toy contains small parts in its unassembled state.
Adult assembly is required.
CAUTION
IMPORTANT!
• A crib mobile is intended for visual stimulation and is not to be grasped by
a child.
• Always attach by all provided fasteners (clamp) tightly to a crib or playpen
according to the instructions. Check frequently.
• Do not add additional strings or straps to attach to a crib or playpen.
Clamp
Base
Mirror
3 Soft Animals
Neck
Head
Canopy
#6 x 5/8” Screw -1
Shown Actual Size
Parts
Page 3
Battery Compartment Door
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert three “C” (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for longer life.
• Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
•When sounds or motions from this toy become faint or stop, it’s time for an adult to
change the batteries!
Shown Actual Size
1.5V x 3
"C" (LR14)
Shown Actual Size
Battery Installation
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information
Page 4
• Surface wash only. Wipe with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
Care
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. PRINTED IN CHINA
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. G5776a-0920
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, visit us on line at www.service.mattel.com.
Write to us at:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, New York 14052.
Consumer Information
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, V
anwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Page 5
Assembly
Head
Base
Neck
Neck
• “Snap” the head onto the neck.
• Gently pull on the head to be sure it
is secure.
•Slide the neck into the slot in the base,
as shown.
• Insert the #6 x 5/8” screw into the hole in
the neck. Tighten the screw with a
Phillips screwdriver. Do not over-tighten.
1
1
1
2
Page 6
• Position the
canopy with
the open side facing down.
• Fit a soft animal string through one of
the slots on the canopy.
• Pull down gently on the soft animal to
secure the string in the canopy.
• Repeat this procedure to attach the
remaining soft animals to the other two
slots in the canopy.
1
3
1
4
• Fit the string
from the head
into the slot in
the center of
the canopy.
• Slide the knot
to the narrow
end of the slot
and pull down
gently on the
canopy to
secure it on
the string.
Assembly
Soft Animal
Soft
Animal
String
Canopy
Slot
String
Slot
Slot
String
Slot
Page 7
Attaching the Mobile to a Crib
Mirror
Top Crib Rail
Fit the mirror onto the top crib rail so that
the threaded peg extends out of the crib.
Hold the mirror in place.
•Slide the mobile assembly onto the
threaded peg from the mirror so that it
also rests on the top crib rail.
• Fit the clamp onto the threaded peg
and turn it clockwise to secure the
mobile to the crib rail. Do not overtighten the clamp.
1
1
1
2
Threaded
Peg
Threaded
Peg
Mobile
Assembly
Clamp
Page 8
Use
Play Mode
Switch
Power/Volume
Switch
Song Select
Button
•Press this button to choose from four
different songs.
Hint: To r estart the mobile, press the
song select button again.
• Locate the power/volume switch on
the base.
• Slide the switch to either: on with low
volume or on with high volume .
• Music begins as the animal friends
“dance” over baby’s head.
•Slide the power/volume switch to the
off position when not in use.
1
1
1
2
1
3
• Locate the play mode switch on the base.
• Slide to short play
for about 3 minutes
of music and motion.
• Slide to long play
for about 7 minutes
of music and motion.
•Slide to this position for about
3 minutes of motion only (no music).
Loading...