w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
G5244
Instructions
Press & Go
™
Train
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
2
All Aboard!
• Locate the power/volume switch on the bottom of the toy.
• Slide the switch to the desired position: off ; on with low volume ; or on
with high volume .
• Press the smokestack and the train moves along with lights and fun music.
• Place a block on the center car for spinning action, lights and music.
• When your child is finished playing with this toy, slide the power/volume
switch to the off position.
Note: If an obstacle blocks the train’s movement, you may hear a clicking
sound. This is normal and will not damage the toy.
Before First Time Use
Please keep small parts such as the plastic tabs out of
children’s reach. Throw the plastic tab away.
CAUTION
Note: A plastic tab was attached to the toy for in-store demonstration purposes.
While the tab may have already been removed, check the bottom of the toy to
be sure. If the plastic tab is still attached, pull and remove the tab from the toy.
Throw the plastic tab away.
Power/Volume Switch