Fisher-Price G3457 Instruction Sheet
<
Keep these instructions for future reference: they
contain important information. IMPORTANT: Please
read all “Consumer Information” before operating your
vehicle.
G3457-0920
G3457-9993-S1
X
CAUTION: Surfaces may become hot and cause
burns if electronics get wet. Do not operate vehicle
through water or snow.
I. CREATURE FEATURES
Vehicle
Transmitter
Vehicle
q ON/OFF switch
w Battery compartment cover
Transmitter
q Left button controls left shells
w Right button controls right shells
e Bottom left toggle closes Shell Shocker™
r Bottom right toggle opens Shell Shocker™
t ON/OFF switch
II. HOW TO CONTROL THE BEAST!
Basic driving
q FORWARD
w LEFT
e RIGHT
r SPIN LEFT
t SPIN RIGHT
y
Closes Shell Shocker™
u Opens Shell Shocker™
Shocking transformations!
Shell Shocker ™ features my ingenious armor shell
configuration that spins and opens for all kinds of
shocking stunts! Here are a few of my favorites.
A Whirlwind spin shield!
With Shell Shocker ™ in explore mode (all shell armor open
outward) push the left button up and the right button down.
For high-speed spins in the opposite direction, push the left
button down and the right button up!
A
NOT RECOMMENDED
FOR CHILDREN UNDER
8 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS,PRECAUTIONS SHOULD BE
OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. INPUT:
120VAC, 60Hz, 0.1A. OUTPUT:8.5VDC, 440mA, 3.74VA.
CAUTION-ELECTRIC TOY:
q
w
e r
y
t
u
TYCO R/C SUPPORT
DON’T RETURN IT TO THE STORE!
®
Questions or problems with your product?
Just call us for help.
U.S. consumers may also register their products at this number.
1 888 557-TYCO (8926)
tycorc.com
w
I
O
q
q
w
t
e
r
B Snap attack tail!
With Shell Shocker ™ in explore mode (all shell armor
open outward) push both buttons up to drive forward.
When you hit full speed, quickly jam both buttons
down. Your vehicle will snap attack with its tail!
*
Note: In this mode the tail will come down fast!
Keep feet, fingers and anything that breathes away
from Shell Shocker™
C Defender bender!
With Shell Shocker ™ in explore mode (all armor open
outward) push the left button up and the right button
down. As the Shell Shocker™ spins press the bottom
left toggle switch beneath the transmitter. The shells
will begin closing even as the Shell Shocker™ spins
frantically about! Now open it up mid spin by pressing
the right toggle switch beneath the transmitter.
III.
HOW TO BRING MY SHELL SHOCKER™TO LIFE!
Requires a 7.2v Tyco®Pro FlexPak®(NiCd) battery pack
for vehicle and a 9v battery for transmitter .
Vehicle
1. First turn Shell Shocker upside down, tail facing you.
2. Now unscrew the battery compartment cover
(screwdriver not included).
3. Hold the Tyco
®
Pro FlexPak®battery pack(not included)
facing up as shown.
4. Now slide the battery end marked #1 down into the
battery compartment. Before you press down on the
battery pack make sure to place the ribbon underneath the battery for easy pull out later.
5. To remove the battery, unscrew the battery door, pull
on the ribbon and lift out the battery.
Transmitter
1. Open the battery door as shown.
2. Install one 9v battery (not included) with polarity (+/-)
as shown inside the battery compartment.
3. Close the battery door.
1
2
B
C
7.2v d.c. NiCd,
6 x Sub C,
1600 mAh
(not included)
Loading...