Page 1
CGM02
CGM04
Keep these
instructions for future
reference, as they
contain important
information.
Adult assembly required.
Required tool: Phillips
screwdriver (not included).
Surface wash with water
and a mild cleaning
solution. Do not use
bleach, silicone or oily
lubricants. Rinse clean
to remove residue.
See additional care
instructions in the
“Let’s Clean Up” section.
CAUTION
This package contains small parts.
For adult assembly only.
IMPORTANT!
Please make sure your child does not follow you
using this toy while you are operating a real lawn mower.
Your child should play in a separate area away from the area where you mow.
Keep bubble solution away from eyes and ensure that
children know that bubble solution should not be swallowed.
fisher-price.com
Page 2
Assembly
Assembly
Upper Handle
Lower Handle
Upper Handle
Lower Handle
1
• Fit the upper handle onto the lower handle.
2
• Insert four #6 x
the handle assembly and tighten with
a Phillips screwdriver. Do not over-tighten.
5
/
" (1,59 cm) screws into
8
SHOWN
ACTUAL SIZE
3
• Insert and “snap” the handle assembly into
the sockets in the back end of the mower.
Hint: The handle assembly is designed to fit one
way. If it does not seem to fit, turn it around
and try again.
Page 3
Bubble Solution
TOP VIEW
SIDE VIEW
Fill Line
Fill Line
Let’s
Fuels the Fun!
Fill Line
TOP VIEW
• Use only bubble solution in this toy.
• Fill the bubble chamber to the fill line with
bubble solution. Do not over-fill.
• Try to avoid spilling bubble solution on the
floor. It may create slippery floor conditions.
• To prevent bubble solution from leaking, use
on a flat, level surface.
Fill Line
SIDE VIEW
Clean Up
• Rinse the bubble chamber regularly and
thoroughly with clean water from a garden
hose or faucet.
• Tip the mower forward to drain water.
Page 4
CONSU
ASSISTANCE
No Bubbles?
No Bubbles?
• Refill the bubble chamber to the fill line.
• The bubble chamber may be clogged. Rinse the bubble chamber thoroughly with clean water
from a garden hose or facet.
• Be sure to push the mower a minimum of 15 walking steps before bubbles begin to flow.
• Walk at a slow, steady pace.
• Push the mower so that the rear wheels always contact the ground.
• Never use silicone or oily lubricants on this product. Bubbles will not form if even a very small
amount of these substances get into the bubble chamber.
MER
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
PRINTED IN MEXICO CGM02a-0920
©2014 Mattel. All Rights Reserved.
Loading...