Page 1
1
CDN48
lay & play
Tummy time
2
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires two AA (LR6) alkaline batteries (not included).
Tool required for battery installation:
Phillips screwdriver (not included).
fisher-price.com
1
3
Take along music
Page 2
CONSU
Consumer Information
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.
MER ASSISTANCE
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may
cause undesired operation.
©2015 Mattel. All Rights Reserved. CDN48-0970
PRINTED IN CHINA 1100295780-DOM
2
Page 3
Battery Installation
1,5V x 2
AA (LR6)
• For longer life, use alkaline batteries.
• Locate the battery compartment door on the
electronic toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door.
• Insert two AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sounds become faint or stop, it’s time
for an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
3
Page 4
Assembled Parts
•
H
m
3 Hanging Toys
Electronic Toy Mirror
Assembly
Arch Assembly
Mat
1
• Locate the hooks and loops underneath
the mat. The hook straps and the loops are
different colors. When properly assembled,
the hook strap color will match the loop color.
• While holding the end of an arch, carefully
•
unfasten the hook with the strap that is
connected the other arch.
Hint: This should be the hook that does not
match the loop.
Arch Assembly with Mat
2
• Next, fasten the hook with strap that matches
the color of the loop on the other end of
the mat.
• Repeat this procedure to assemble the hooks
to the loops on the other side of the mat.
4
Page 5
Assembly
Care
Mirror
Arch
3
• Wrap the straps on the mirror around an arch
and close the fasteners.
• The mat is machine washable. Remove the
arch assembly from the mat.
• While holding the arches together, carefully
unfasten the hook on each end of the arches.
• Machine wash cold on the gentle cycle. Do
not use bleach. Tumble dry on low heat.
• The arch assembly, hard toys and electronic
toy are surface washable only. Wipe with
a clean cloth dampened with a mild soap and
water solution. Do not immerse.
5
Page 6
Playful music & bat-at wiggle bar!
Electronic Toy
WARNING
To prevent entanglement injury,
never place the gym in a crib or
playpen. Never add strings, ties or
other products to the gym.
Hang the other toys
on the loops around
the gym.
Power/Volume
Switch
• Slide the power/volume switch on the
electronic toy to ON with low volume , ON
with high volume or OFF .
• Press the button to play approximately
10 minutes of music.
6
Loading...