Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
MER
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada. L’utilisation de ce
dispositif est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire de brouillage
et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
For best performance, we recommend
replacing the batteries that came with this
toy with two, new AA (LR6) batteries. Use
alkaline batteries for longer life.
• Loosen the screw in the battery compartment door
and remove the door.
• Remove the exhausted batteries and
dispose properly.
• Insert two, new AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
Battery Safety Information
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-
use. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are used, they
are only to be charged under adult supervision.
FCC Statement (United States Only)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the
separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV
technician for help. Changes or modifications not
expressly approved by the manufacturer
responsible
for compliance could void the user’s authority to
operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation
the following two
conditions: (1) this device may
is subject to
not cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
3
Page 4
Assembly
y
CAUTION
This package contains
small parts.
For adult assembly only.
Barn
Base
1
• Fit the tabs on the bottom of the barn into the base. Push to “snap” in place.
Ladder
2
• Fit the tab on the ladder into the slot in the base. Push to “snap” in place.
• Insert two screws into the ladder and tighten.
4
Page 5
Assembly
Shed
3
• First, fit the tab on the bottom of the shed into the slot in the base . Push to “snap” in place.
• Next, fit the tab on the top of the shed into the slot in the barn wall . Push to “snap” in place.
Break-Away Door
Hint: The silo door is designed to break away from the barn. If it falls off, simply re-assemble it to the barn.
• At an angle, fit the tab on the door hinge into the slot in the door frame.
• Push to “snap” the other door hinge in place.
5
Page 6
Lots of activities, sounds and songs!
Open and close the
door or drop a hay
bale through the silo
for fun animal sounds!
Turn the dial for day or night
mode. Hear different songs
and sounds in each mode!
Connect the fence pieces
and gate to build a corral
for the animals!
Slide the power switch on
the bottom of the toy to
ON or OFF .
Open and close the
door or drop a hay
bale through the silo
for fun animal sounds!
Connect the fence pieces
and gate to build a corral
for the animals!
Turn the dial for day or night
mode. Hear different songs
and sounds in each mode!
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power switch off and back on.
• When sounds become faint or stop, it’s
time for an adult to change the batteries.
6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.