Press “radio”
button for sounds!
BFR51
Keep these instructions for
future reference as they
contain important information.
Battery installation is required.
Only adults should install batteries.
Required tool: Phillips
screwdriver (not included).
1,5V x 1
AA (LR6)
Requires one AA battery
(included) for operation.
Battery included is for
demonstration purposes only.
• For best performance and longer battery life, we
recommend replacing the battery that came with
this toy with one, new AA (LR6) alkaline battery.
• Locate the battery compartment door. Loosen
the screw in the battery compartment door with
a Phillips screwdriver. Remove the battery and
properly dispose of them.
• Insert one, new AA (LR6) alkaline battery.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• When sounds from this product become faint or
stop, it’s time for an adult to change the battery.
• Wipe the toy with a clean, damp cloth. Do not
immerse. This toy has no consumer serviceable
parts. Do not take apart.
• If this product begins to operate erratically, you
may need to reset the electronics.
1-800-432-5437 (US & Canada)
MER ASSISTANCE
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Battery Safety Information
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of nonuse. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they
are only to be charged under adult supervision.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures: Reorient or relocate the
receiving antenna. Increase the separation between
the equipment and receiver. Consult the dealer or an
experienced radio/TV technician for help. Connect
the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Changes or modifications not expressively
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may
not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
PRINTED IN CHINA BFR51PKG-0920
©2014 Mattel. All Rights Reserved.