Fisher-Price B9785 Instruction Sheet

Download

Page 1

Product features may vary

from the picture above.

KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY

KAWASAKI MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE

OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE

DIRECTED TO FISHER-PRICE, INC./POWER WHEELS,

636 GIRARD AVENUE, EAST AURORA, NY 14052.

Please read this manual and save it

with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Hammer and

Adjustable Wrench (all not included); Assembly Tool (included).

Use only with a Power Wheels

12 Volt Rechargeable Battery

with A-Style Connector and Built-In Thermal Fuse and

Power Wheels

12 Volt Charger (both included).

Owner's Manual

with Assembly

Instructions

For Model

B9785

Product features may vary

from the picture above.

Owner's Manual

with Assembly

Instructions

For Model

For Model B9785

Please read this manual and save it

with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Hammer and

Adjustable Wrench (all not included); Assembly Tool (included).

Use only with a Power Wheels

Use only with a Power Wheels® 12 Volt Rechargeable Battery

with A-Style Connector and Built-In Thermal Fuse and

Power Wheels

Power Wheels® 12 Volt Charger (both included).

KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY

KAWASAKI MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE

OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE

DIRECTED TO FISHER-PRICE, INC./POWER WHEELS,

636 GIRARD AVENUE, EAST AURORA, NY 14052.

12 Volt Charger (both included).

B9785

12 Volt Rechargeable Battery

Page 2

TABLE OF CONTENTS

A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Parts Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Battery Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

FCC Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Vehicle Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

L Battery Care and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Safe Driving Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

TABLE OF CONTENTS

Vehicle Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

• Your new vehicle requires adult assembly. Please set aside at least 60 minutes for assembly.

• You must charge your battery for 18 - 30 hours before you use your vehicle for the first time. We recommend that you start charging your battery before beginning assembly. Please see Battery Charging beginning on page 7 for detailed instructions.

• Read this manual carefully for important safety information and operating instructions before using your vehicle. Keep this manual for future reference as it contains important information.

• This vehicle is designed for use on: grass, concrete, asphalt and other hard surfaces; on generally level terrain; and by children 3 years of age and up.

• Make sure children know and follow these rules for safe driving and riding:

- always sit on the seat.

- always wear shoes.

- only 2 (two) riders at a time (one on vehicle, one in trailer).

• Use this vehicle ONLY outdoors. Most interior flooring can be damaged by riding this vehicle indoors. Fisher-Price® will not be responsible for damage to the floor if the vehicle is used indoors.

• To prevent damaging the motors and gears, teach your child to stop the vehicle before switching direction. Do not tow anything behind the vehicle or overload it. Do not exceed the maximum weight capacity of 130 lbs (59 kg) - vehicle 90 lbs. (41 kg); trailer 40 lbs. (18 kg).

IMPORTANT INFORMATION

• For safety reasons, your vehicle has been pre-set so that it will

operate at low speed. You must connect the high speed lock-out to allow operation of the vehicle at high speed. Please see page 23 for detailed instructions.

• If you have any questions about your Power Wheels® vehicle,

please call our toll-free service lines at 1-800-348-0751 from 8 AM to 6 PM (EST) Monday through Friday. Trained customer service representatives are available to take your call in English or French. Habla Español? Si usted tiene alguna pregunta ó necesita asistencia llame gratis 1-800-348-0755 para los Estados Unidos. Tenemos representantes que hablan español para atender su llamada.

• For your convenience, Power Wheels® maintains an independently

owned and operated Authorized Service Center Network with more than 400 authorized service centers nationwide. Our authorized service centers will repair or replace parts under warranty at no extra charge, and can perform non-warranty repairs for a minimal charge. To find the authorized service center nearest you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751.

• To register your vehicle, please visit us on-line at

www.powerwheels.com.

C3493pr-0921

B9785b-0920

Page 3

WARNINGS AND CAUTIONS

ELECTRICAL HAZARD

WARNING

• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.

• PREVENT FIRE

- Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system.

- Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.

- Use of Power Wheels cause overheating, fire or explosion.

• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid

(electrolyte). Dropping the battery could result in serious injury.

• Never allow children to charge the battery. Battery charging must be done by adults only. A child

could be injured by the electricity involved in charging the battery.

• Never lift or carry the battery by the wires or connector. This can damage the battery and

possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.

• Read the safety instructions on the battery.

• Examine the battery, charger and their connectors for excessive wear or damage each time

you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.

• HOT motors. Handle carefully.

components in products other than Power Wheels® vehicles could

RIDING HAZARD

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas.

These areas must be:

- away from swimming pools and other bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, cars, steep inclines, roads and alleys.

CAUTION

• In the unassembled state, this package contains small parts. Adult assembly is required.

• Use the charger in dry locations only.

B9785b-0920

C3493pr-0921

Page 4

PARTS

• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product

to the store.

• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.

• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any

excess lubricant.

Narrow Front

Vehicle Wheels - 2

Vehicle Body

Seat

Brushguard

Rack

(Located on front end

of vehicle)

Large

Vehicle Hubcap - 4

Shovel

Wide Rear

Vehicle Wheels - 2

Long Rear Vehicle Axle

B9785b-0920

C3493pr-0921

Page 5

Bucket

PARTS

Handlebar

Left Grip with

Small Hole

Trailer Frame

Fender - 2

Short Trailer Axle

Small Trailer Wheel - 2

Hitch Cover

Right Grip with

Large Hole

B9785b-0920

Small Trailer Hubcap - 2

Rear Wheel

Driver - 2

Hitch Mount Clip

C3493pr-0921

Page 6

Key

Small Bushing - 4

Knob - 2

Large Bushing - 2

PARTS

#10 x

/4" Screw - 1

10 Lock Nut - 1

#8 x 3/4" Screw - 23

Part not shown: Label Sheet and Assembly Tool

12 Volt Battery

#8 x 2" Screw - 4

/16" Washer - 2

/16" Washer - 4

.437"

12 Volt Charger

.437 Cap Nut - 4

For your convenience, we included extra fasteners!

Note: Tighten and loosen all screws with a Phillips screwdriver.

Do not over-tighten the screws.

Fasteners Shown Actual Size

B9785b-0920

C3493pr-0921

Page 7

VEHICLE

PARTS DIAGRAM

Note: Some parts shown are assembled on both sides of the vehicle.

B9785b-0920

Page 8

PARTS DIAGRAM

TRAILER

Note: Some parts shown are assembled on both sides of the vehicle.

Vehicle

Seat

Shovel

Rack

Battery Compartment Cover

Handlebar

Left Grip (Small Hole)

Right Grip (Large Hole)

Key

Knob - 2

12 Volt Battery

Brushguard

7/16" Washer - 2

Large Bushing - 2

Narrow Front Vehicle Wheel - 2

Large Vehicle Hubcap - 4

.437 Cap Nut - 4

Rear Wheel Driver - 2

Wide Rear Vehicle Wheel - 2

Long Rear Vehicle Axle

12 Volt Charger

Bucket

Fender - 2

Trailer Frame

Hitch Mount Clip

Hitch Cover

Short Trailer Axle

Small Bushing - 4

Small Trailer Wheel - 2

Small Trailer Hubcap - 2

3/16" Washer - 2

#10 x 3/4" Screw

#10 Lock Nut

Parts Not Shown

Assembly Tool

Label Sheet

#8 x 3/4" Screw - 23

#8 x 2" Screw - 4

B9785b-0920

Page 9

BATTERY CHARGING

ELECTRICAL HAZARD

WARNING

• Battery can fall out and injure a child if

vehicle tips over. Always use battery retainer.

• PREVENT FIRE

- Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system.

- Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.

- Use of Power Wheels products other than Power Wheels vehicles could cause overheating, fire or explosion.

• The battery must be handled by adults only.

The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injury.

• Never allow children to charge the battery.

Battery charging must be done by adults only. A child could be injured by the electricity involved in charging the battery.

• Never lift or carry the battery by the wires

or connector. This can damage the battery and possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.

• Read the safety instructions on the battery.

• Examine the battery, charger and their

connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.

components in

CAUTION

Use the charger in dry locations only.

About Thermal Fuses

Your Power Wheels® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, it will automatically reset itself after approximately 25 seconds and allow the vehicle to resume normal operations. To avoid repeated automatic shut-downs, do not overload the vehicle by exceeding the 130 lb. (59 kg) total maximum weight capacity (vehicle 90 lbs. - 41 kg; trailer 40 lbs. - 18 kg) or by towing anything behind the vehicle. Avoid severe driving conditions, such as driving up slopes or running into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors and make sure your child stops the vehicle before switching direction.

If a thermal fuse in a battery continually trips under normal driving conditions, please contact your local Power Wheels® Authorized Service Center. For the location of the Authorized Service Center nearest to you, visit us on-line at www.powerwheels.com, or call 1-800-348-0751.

Important Notes

• Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time.

• We recommend that you start charging your battery before beginning assembly of your new vehicle.

• The battery must be upright while charging.

• The charger is not a toy.

• Do not short circuit the battery.

• You do not need to remove the battery from your vehicle to recharge it.

• Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process. If damage is detected, do not charge the battery or use it in your vehicle. Battery acid is very corrosive and can cause severe damage to surfaces it contacts.

• Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery.

• Use only a Power Wheels® 12 volt charger with "12 V" connector (120 VAC, 60 Hz, 28W with an output of 12 VDC, 1200 mA) to charge your Power Wheels® 12 volt battery.

Adults Note: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury. In the event of any damage, do not use the charger until the damage has been properly repaired. Please call 1-800-348-0751.

• If your battery is old and will not accept a charge, do not leave it in the vehicle. Always remove a dead battery from the vehicle.

B9785b-0920

Page 10

BATTERY CHARGING

Battery

Connector

ASSEMBLY

WARNING

Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.

Vehicle

Charger

Connector

• Plug the charger connector into the battery connector

• Plug the charger into a standard wall outlet Note: If power flow to the wall outlet is controlled by a switch, make

sure the switch is “ON”.

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

• Recharge the battery for at least 14 hours after each use of your vehicle. Do not charge the battery longer than 30 hours.

• Once the battery is charged, disconnect the battery connector from the charger connector. Unplug the charger from the wall outlet. The battery is now ready to be installed in your vehicle. Please see the Battery Installation section on page 20 for detailed instructions on installing your battery. If your battery is already installed in your vehicle, simply re-connect the motor harness connector to the battery.

FCC NOTE

United States Only

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

#8 x 3/4" Screws

Rack

Hint: The rack is located on the front end of the vehicle. If it has been removed, please fit the rack to the pegs on the front end of the vehicle.

• Fit a #8 x 3/4" screw into one of the indents in the rack.

• Using a Phillips screwdriver, turn the screw to make a hole in the rack. Continue to tighten the screw with the Phillips screwdriver.

• Repeat this procedure to assemble three more #8 x 3/4" screws into the rack.

B9785b-0920

Page 11

#8 x 3/4" Screws

ASSEMBLY

/16" Washer

Large Bushing

Flat Side First

• Turn the vehicle upside down.

• Insert two #8 x 3/4" screws into the front end of the vehicle, as shown, and tighten.

(Left and Right)

BOTTOM VIEW

Narrow Front

Vehicle Wheel

Wide Rear

Vehicle Wheel

(Left and Right)

Narrow Front

Vehicle Wheel

Front Axle

• Slide a 7/16" washer onto a front axle.

• Slide a large bushing, flat side first, onto a front axle.

• Slide a narrow front vehicle wheel (labeled R), flat side first, onto a

front axle.

• Slide a large hubcap, peg side first, onto a front axle.

BOTTOM FRONT VIEW

Flat Side First

Assembly Tool

Large Hubcap

Peg Side First

• Locate and identify the front vehicle wheels and the rear vehicle wheels.

• The front vehicle wheels are narrow and will be used in Assembly step 4.

• The rear vehicle wheels are wide and will be used in Assembly step 6.

B9785b-0920

Cap Nut

.437"

• Fit a .437 cap nut on the end of the front axle.

• Fit the assembly tool over the cap nut. Tap the end of the assembly tool with a hammer to secure the cap nut on the end of the front axle. Pull on the front wheel to be sure it is secure.

• Repeat Assembly steps 4 and 5 to assemble the other narrow front vehicle wheel (labeled L) to the other front axle.

C3493pr-0921

Page 12

ASSEMBLY

Rear Wheel Driver

Ring Side Down

Wide Rear

Vehicle Wheel

Ribs Face Up

Large Hubcap

Indented Side Down

Long Vehicle

Rear Axle

• Slide a large hubcap, indented side down, onto the long vehicle rear axle.

• Slide a wide rear vehicle wheel (labeled R) onto the long vehicle rear axle. Make sure the ribs on the wheel face up.

• Slide a rear wheel driver, ring side down, onto the long vehicle rear axle. Fit the grooves on the rear wheel driver onto the ribs on the wide rear vehicle wheel.

Wide Rear

Vehicle Wheel

Ribs Face In

• Slide a rear wheel driver, ring side out, onto the vehicle rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly.

• Slide a wide rear vehicle wheel (labeled L), ribs facing in, onto the vehicle rear axle. Make sure the ribs on the wide rear vehicle wheel fit into the grooves on the rear wheel driver.

• Slide a large hubcap, indented side out, onto the vehicle rear axle.

Large Hubcap

Indented Side Out

Rear Wheel Driver

Ring Side Out

Pins in Motor

Assembly

Vehicle Rear Axle

Assembly

• Face the rear of the vehicle.

• Insert the vehicle rear axle assembly into the hole in the rear of the vehicle. Make sure the rear wheel driver fits onto the pins in the motor assembly.

BOTTOM REAR VIEW

Assembly

Tool

Cap Nut

.437"

• Fit a .437 cap nut on the end of the vehicle rear axle.

• Fit the cupped end of the assembly tool over the cap nut and tap the end of the assembly tool with a hammer to secure the cap nut on the end of the vehicle rear axle.

Hint: You may need the help of another adult to support the other end of the vehicle rear axle.

• Pull the wide rear vehicle wheel to be sure it is secure.

B9785b-0920

Page 13

Steering

Linkage

Brushguard

ASSEMBLY

Handlebar Connector

Steering

Column

Opening

• Face the front end of the vehicle.

• Fit the long flat end of the brushguard under the steering linkage.

/16"

Washers

BOTTOM FRONT VIEW

#8 x 2" Screws

IMPORTANT! Be sure to fit the handlebar connector down through the opening in the front end of the vehicle before you snap the handlebar to the vehicle.

• Insert the steering column down through the opening in the front end of the vehicle A. Be sure to fit the steering column through the opening in the brushguard and the hole in the steering linkage (underneath the vehicle).

• Now, insert the handlebar connector down through the same opening in the front end of the vehicle

• Push to “snap” the handlebar into the vehicle.

Hint: The handlebar connector is used for high speed use. Please see page 22 for more information.

FRONT VIEW

#8 x 2" Screws

• Fit a 3/16" washer onto two #8 x 2" screws.

• Insert the screws with washer into the bottom of the brushguard and tighten.

• Insert two more #8 x 2" screws into the front of the brushguard and tighten.

• Turn the vehicle upright.

B9785b-0920

C3493pr-0921

Page 14

ASSEMBLY

#10 Lock Nut

#10 x 3/4" Screw

• While holding the handlebar in place, carefully turn the vehicle over.

• Make sure the end of the steering column is through the hole in the steering linkage.

• Insert the #10 x 3/4" screw through the hole in the end of the steering column, so that the screw head faces the rear of the vehicle.

• Fit the #10 lock nut onto the end of the screw. Make sure the rounded side of the lock nut faces the front of the vehicle.

• While holding the lock nut steady with an adjustable wrench, tighten the screw with a Phillips screwdriver. Do not over-tighten.

BOTTOM FRONT VIEW

Label #7

• Apply label #7 to the handlebar.

Knobs

Handlebar

Key

Front Tab

Rear Tab

• Turn the vehicle upright.

• First, insert the tab on the front of the seat into the slot toward the front end of the vehicle A.

• Then, insert and “snap” the tab on the rear of the seat into the slot in the rear of the vehicle B.

REAR VIEW

• Insert and “snap” the key into the hole in the right side of

the handlebar.

• Insert and “snap” the knobs into the holes in the left side of

the handlebar.

B9785b-0920

Page 15

ASSEMBLY

Right Grip Large Hole

Hint: The left and right grips are not interchangeable! The hole in the left grip is smaller than the hole in the right grip.

• Fit the left grip on the end of the left handlebar.

• Fit the right grip on the end of the right handlebar.

Hint: If it is difficult to slide a grip onto the handlebar, moisten the inside of the grip with water.

FRONT VIEW

Left Grip Small Hole

#8 x 3/4" Screws

• Insert four #8 x 3/4" screws into the trailer frame slats and tighten.

Bucket

Slats

Trailer Frame

Grooves

• Turn the bucket so the bottom is facing you.

• Fit the slats on the trailer frame to the grooves in the bucket.

Bucket

Trailer Frame

• Rotate the bucket onto the trailer frame.

B9785b-0920

C3493pr-0921

Page 16

ASSEMBLY

Small Bushing

Ring Side Down

/16" Washer

Small Bushing

Barrel Side First

Small

Trailer Wheel

Flat Side Up

Small Trailer Hubcap

Indented Side Down

Short Trailer Axle

SMALL

BUSHING

Ring

Barrel

Trailer Frame Holes

Trailer Axle

Assembly

• Turn the trailer assembly upside-down.

• Slide the trailer axle assembly through the holes in the trailer frame.

Small Bushing

Ring Side First

BOTTOM VIEW

Small Bushing

Barrel Side First

Trailer Axle

Assembly

• Slide a small trailer hubcap, indented side down, onto the short trailer axle.

• Slide a small trailer wheel, flat side up, onto the short trailer axle.

• Slide a small bushing, barrel side first, onto the short trailer axle.

• Slide a 7/16" washer onto the short trailer axle.

• Slide another small bushing, ring side down, onto the short trailer axle.

Small Trailer

Hubcap

Peg Side First

/16" Washer

Small Trailer Wheel

Flat Side First

• Slide a small bushing, barrel side first, onto the trailer axle.

• Slide a

• Slide another small bushing, ring side first, onto the trailer axle.

• Slide the small trailer wheel, flat side first, onto the trailer axle.

• Fit a small trailer hubcap, peg side first, onto the trailer axle.

/16" washer onto the trailer axle.

SMALL

BUSHING

Ring

Barrel

B9785b-0920

Page 17

ASSEMBLY

Hitch Cover

Cap Nut

Assembly

Tool

Trailer Axle

.437"

• Fit a .437 cap nut on the end of the trailer axle.

• Fit the cupped end of the assembly tool over the cap nut. Tap the end of the assembly tool with a hammer to secure the cap nut on the end of the trailer axle.

Hint: You may need the help of another adult to support the other end of the trailer axle.

• Pull on the small trailer wheel to be sure it is secure.

Hitch Clip

• Fit the hitch cover over the hitch clip and onto the trailer assembly.

• Insert five #8 x 3/4" screws into the hitch cover and tighten.

Insert #8 x 3/4"Screws

through Inner Holes

Indent

• Position the hitch clip with the tabs upright and the long end toward the rear end of the trailer assembly.

• Fit the hitch clip onto the indent in the trailer assembly.

B9785b-0920

Rear End

of Trailer Assembly

Fender

• Turn the trailer upright.

• Fit a fender to the side of the bucket.

• First, insert two #8 x 3/4" screws through the inner holes inside the

bucket and into the fender. Tighten the screws. Do not over-tighten

these screws.

C3493pr-0921

Page 18

ASSEMBLY

Insert #8 x 3/4" Screws

through Outer Holes

• Next, insert two more #8 x 3/4" screws through the outer holes inside the bucket and into the fender. Tighten the screws.

• Repeat Assembly steps 27 and 28 to assemble the other fender to the other side of the bucket. Do not over-tighten these screws.

ASSEMBLY

• Check all screws, cap nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces.

• During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to charge the battery at least once per month while your vehicle is not in regular use.

• Avoid operating the vehicle in wet or snowy conditions, and do not spray the vehicle with a hose. Do not wash the vehicle with soap and water. Water or moisture in the motors or electrical switches can cause them to corrode, and could cause switch or motor failure.

• Avoid operating the vehicle on sand, loose dirt or gravel. Sand, loose dirt or gravel in the motors or electrical switches can cause them to jam, and could cause switch or motor failure.

• The vehicle can be wiped down with a soft, dry cloth. For a shiny finish, you can wipe plastic parts with a non-wax furniture polish applied to a soft-cloth. Do not use automotive wax. Do not use soap and water or spray the vehicle with a hose.

• To ensure that your vehicle stays in good operating order, we recommend that you periodically have your vehicle checked by a Power Wheels authorized service center nearest you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751.

VEHICLE CARE

BUMPER-TO-BUMPER*

LIMITED WARRANTY

authorized service center. For the location of the

Shovel

Trailer Hitch

Trailer Mount Hole

• Snap the shovel into the clips in the rear of the vehicle.

• Insert and “snap” the trailer hitch into the hole in the trailer mount

on the back end of the vehicle.

*One year limited warranty from the date of

purchase on the Power Wheels

vehicle.

Six month limited warranty on the 12 volt battery.

For the original purchaser, this one year limited warranty covers the Power Wheels® ride-on vehicle (purchased from Power Wheels®) against defects in materials and workmanship. The six month limited warranty applies only to the 12 volt battery included by Power Wheels® with the original purchase of the vehicle. This warranty covers normal use and does not cover the Power Wheels® vehicle or battery if damaged by unreasonable use, neglect, accident, abuse, misuse, improper service or other causes not arising out of defects in materials or workmanship. Evidence of any attempt at consumer repair will void this warranty. THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY LIABILITY ON THE PART OF POWER WHEELS®, WHETHER UNDER THIS WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION SO THIS LIMITATION MAY NOT APPLY TO YOU.

Should you need service or assistance with your vehicle during the warranty period, do not return the vehicle to the store. Power Wheels service centers. If there is not an authorized service center in your area, please visit us on-line at www.powerwheels.com or call Consumer Relations for information, 1-800-348-0751.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.

has provided a nationwide network of authorized

B9785b-0920

Page 19

DECORATION

Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind:

• Wash your hands before applying the labels.

• Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.

• Place the labels exactly as shown in the illustrations.

• For best results, avoid repositioning a label once it has been applied to the vehicle.

• After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the center of a label, and smooth towards the outer edges to remove air bubbles.

12 9

FRONT VIEW

(Apply the other label 5 to the other side of the vehicle.)

(Apply the other label 8 to

the other side of the vehicle.)

(Apply label 2 to the other side of the vehicle.)

B9785b-0920

(Apply label 3 to the other side of the vehicle.)

Page 20

BATTERY INSTALLATION

IMPORTANT! Use only a Power Wheels® 12 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.

Power Wheels® 12 Volt Battery

Motor Harness

Connector

Battery

Compartment

Cover

12 volt charger before

Battery

Compartment

Cover

• Lift and rotate the battery compartment cover open.

• Plug the motor harness connector into the battery. Push firmly.

• Rotate the battery compartment cover closed.

• Push the battery compartment cover to “snap” into place.

• Push the battery clamp.

• Insert the 12 volt battery into the battery compartment.

• Release the battery clamp.

Battery Clamp

B9785b-0920

Page 21

BATTERY CARE AND DISPOSAL

Care

If a battery leak develops, avoid contact with the leaking acid and

place the damaged battery in a plastic bag. See information below for proper disposal.

If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician.

If acid is internally ingested, give water, milk of magnesia or egg whites immediately. Never give emetics or induce vomiting. Call a physician.

• Charge a new battery for at least 18 hours before first use. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease vehicle running time.

• After the first charge, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Charge the battery after each use, regardless of how long the vehicle was used.

• The battery must be upright while charging.

• Do not allow the battery to run down completely before charging.

• Charge the battery before storing the vehicle.

• Charge the battery at least once per month, even if the vehicle has not been used.

• Leaving the battery in a discharged condition will ruin it.

• Always remove an exhausted battery from the vehicle. Battery leakage and corrosion can damage the vehicle.

• Do not store the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you store the battery.

• Do not store the battery in temperatures above 75° F or below -10° F.

• Use only a Power Wheels new battery for at least 18 hours before first use.

• Prevent the battery from moving freely inside the battery compartment. Always use the battery clamp to secure the battery in the

battery compartment.

• Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage is detected, do not use the charger or the battery until you have replaced the worn or damaged part.

12 volt battery. Remember to charge the

Disposal

• Your Power Wheels® battery is a non-spillable, sealed lead-acid battery. It must be recycled or disposed of in an environmentally sound manner.

• Do not dispose of a lead-acid battery in a fire. The battery may explode or leak.

• Do not dispose of a lead-acid battery in your regular, household trash. The incineration, landfilling or mixing of sealed lead-acid batteries with household trash is prohibited by law in most areas.

• Return an exhausted battery to a federal or state approved lead-acid battery recycler, such as a Power Wheels or a local seller of automotive batteries. For the authorized service center location nearest to you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751. Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and disposal of lead-acid batteries. If you live in the State of Florida or the State of Minnesota, it is prohibited by law for anyone to throw away lead-acid batteries in the municipal waste stream.

authorized service center

B9785b-0920

Page 22

SAFE DRIVING RULES

RIDING HAZARD

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas. These areas must be:

- away from swimming pools and other bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, cars, steep inclines, roads and alleys.

Teach Safety Rules to Children

While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s skill level and ability to drive this vehicle safely. Children are not always able to recognize or anticipate hazards, even when they have been taught about them. There is no acceptable substitute for direct adult supervision.

Teach appropriate safety rules to your child before allowing operation of this vehicle. These rules should also be reviewed with neighborhood children or other playmates who want to drive this vehicle.

Riding Rules

Make sure children know and follow these rules for safe driving:

1. Always sit on the seat.

2. Always wear shoes.

3. Only 2 (two) riders at a time. One child on the vehicle and one child in the trailer. A child who is not sitting on the seat or who is standing on the vehicle could fall off, cause a tip-over or block the driver’s view. A child could be seriously injured.

4. Do not allow any child to drive the vehicle in the street or near moving (motorized) vehicles.

5. Do not allow any child to drive near bodies of water (such as pools or creeks), obstructions (such as furniture, low tree limbs or play equipment), or drop-offs (such as stairs or decks).

6. Do not allow any child to drive the vehicle in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicle only in the daytime or a well-lit area.

7. Do not allow your child to drive on sloped or inclined surfaces. Restrict your child’s driving to generally level ground ONLY!

8. Do not allow your child to drive down or across a steep slope.

- The vehicle may gain unsafe speed, even if the pedal is released

to stop.

- The vehicle may tilt and tip over.

- The wheels could lose traction, causing the vehicle to slip.

9. Do not allow your child to drive up steep inclines. The motor may stop and the vehicle could roll backwards at an unsafe speed.

10. Never put anything near any moving parts. Rotating parts such as motors, gear boxes and wheels can snag fingers, hair, etc., causing serious injury. Do not allow operation of the vehicle when it is on its side or in an upside-down position.

11. Do not operate the vehicle near flammable vapors (gasoline, paint thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches, like most electrical switches, emit an internal spark when first turned on or turned off. The presence of flammable liquids or vapors could cause an explosion or a fire. Keep all flammable products in tightly sealed containers and away from the vehicle.

12. Do not allow a child to operate the vehicle without direct adult supervision. To prevent unsupervised use of the vehicle, disconnect the motor harness from the battery when the vehicle is not in use.

To disconnect the motor harness connector:

• Turn the vehicle on its side.

• Disconnect the handlebar connector from the motor connector.

B9785b-0920

Page 23

VEHICLE OPERATION

IMPORTANT! Use this vehicle ONLY outdoors. Most interior flooring can be damaged by riding this vehicle indoors. Fisher-Price® will not be responsible for damage to the floor if the vehicle is used indoors.

Beginner Use - Low Speed Drive

As assembled, your vehicle is ready to roll in low speed (21/2 mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. See the instructions on this and the following page to

connect the high speed hook-up and use the high speed grip.

Drive/Reverse

Buttons

• Press the drive button on the tank.

• Press the foot pedal. The vehicle drives forward at a maximum speed of 21/2 mph.

• Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in low speed.

To Back Up

IMPORTANT! To prevent damaging the motors and gears, teach your

child to stop the vehicle before switching direction. Never shift from drive to reverse, or from reverse to drive, without stopping.

• Your vehicle has a patented, electronic braking system that automatically stops the vehicle when your child’s foot lifts from the pedal. Make sure your child is comfortable with steering the vehicle and automatically knows how to stop.

Advanced Use - High Speed Drive

Motor Connector

Handlebar Connector

BOTTOM VIEW

• Turn the vehicle on its side.

• Plug the motor and handlebar connectors together.

Drive/Reverse

Buttons

• Press the reverse button on the tank.

• Press the foot pedal. The vehicle backs-up at a maximum speed of 21/2 mph.

Note: The vehicle is designed to operate in low speed (21/2 mph) only in reverse.

• Help your child practice steering to learn how far and how quickly to turn the handlebar when driving in reverse, (especially when the trailer is attached). Guiding the trailer in reverse requires skill.

B9785b-0920

Twist Grip

to Activate High

Speed

IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed.

• Turn the right grip to shift the vehicle into high speed. The vehicle drives forward at a maximum speed of 5 mph.

• Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in high speed.

Page 24

VEHICLE OPERATION

Trailer Hook-Up

IMPORTANT! Do not attach any other vehicle or object to the vehicle.

Trailer Hitch

Trailer Mount Hole

Hint: We recommend adult assistance.

• Insert and “snap” the trailer hitch into the hole in the trailer mount

on the back end of the vehicle. Pull the trailer hitch up to be sure it is secure on the vehicle.

Dump the Bucket

IMPORTANT! Be sure you instruct children that it is unsafe to press

the latch while a child is riding in the trailer.

Latch

• Push the latch and watch the bucket dump!

Trailer Removal

IMPORTANT! Do not attach the trailer to any other vehicle.

Hitch Clip

Hint: We recommend adult assistance.

• Squeeze the hitch clip and push up to remove the trailer from the vehicle.

C3493pr-0921

B9785b-0920

Page 25

PROBLEMS AND SOLUTIONS GUIDE

ASSEMBLY

IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels® authorized service center. For the location nearest you, please visit us on-line at www.powerwheels.com, or call 1-800-348-0751.

PROBLEM POSSIBLE CAUSE SOLUTION

Vehicle does not run Undercharged battery Charge the battery. A new battery should have been charged for at

Charger is not working There is no sure way to tell if your charger is working unless you

Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the

Loose wire or loose connectors Check all wires and connectors. Make sure the motor harness

least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours.

Check all connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

have a volt meter. If you suspect there is a problem with your charger, contact your local Power Wheels® authorized service center. They can test your charger for you.

vehicle if the vehicle is overloaded or the driving conditions too severe. The fuse will automatically reset itself after approximately 25 seconds, allowing the vehicle to resume normal operation. To avoid repeated automatic shutdowns, do not overload the vehicle by exceeding the 130 lb. maximum weight capacity (90 lbs. vehicle; 40 lbs. trailer) or by towing anything behind the vehicle. Do not drive up hills or run into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors. If a thermal fuse continually trips, contact your local Power Wheels® authorized service center.

connector is plugged into the battery, and that there are no loose wires around the motors.

Vehicle was running but suddenly stopped

Dead battery If your battery is old or if you have not followed Battery Care

instructions, your battery may be dead. If you are unsure whether or not the battery is dead, you can have it tested at your local Power Wheels® authorized service center.

Electrical switch damage The electrical switches can become corroded due to exposure to

water or moisture, or can jam due to loose dirt, sand or gravel. Contact your local Power Wheels® authorized service center for diagnosis and repair.

Motor damage Contact your local Power Wheels® authorized service center for

diagnosis and repair.

Loose wire or loose connectors Check all wires and connectors. Make sure the motor harness

connector is plugged into the battery, and that there are no loose wires around the motors.

Tripped thermal fuse The built-in thermal fuse may "trip" and shut down operation of the

B9785b-0920

Page 26

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM POSSIBLE CAUSE SOLUTION

Short run time (Less than 1 - 3 hours per charge)

Undercharged battery Charge the battery. A new battery should have been charged for at

Overcharged battery Do not charge the battery longer than 30 hours. If you suspect that

Battery is old and will not accept full charge

Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the

least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours.

Check all wires and connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

your battery is damaged as a result of overcharging, contact your local Power Wheels battery for you.

Even with proper care, a rechargeable battery does not last forever. Average battery life is 1 to 3 years depending on vehicle use and use conditions. Replace the battery with a new Power Wheels® 12 volt rechargeable battery. Do not substitute parts.

authorized service center. They can test your

Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at

Battery needs charging Be sure to charge the battery after each use.

Battery is old and will not accept full charge

Vehicle is overloaded Make sure you do not overload the vehicle by allowing more than

Driving conditions are too stressful Use only on generally level ground.

least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours.

Check all connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

Even with proper care, a rechargeable battery does not last forever. Average battery life is 1 to 3 years depending on the vehicle use and use conditions. Replace the battery with a new Power Wheels® 12 volt rechargable battery. Do not substitute parts.

two riders at one time, by exceeding the total 130 lb. maximum weight capacity (90 lbs. vehicle; 40 lbs. trailer), or by towing objects behind the vehicle.

C3493pr-0921

B9785b-0920

Page 27

PROBLEMS AND SOLUTIONS GUIDE

ASSEMBLY

PROBLEM POSSIBLE CAUSE SOLUTION

Vehicle runs in low speed, but does not run in high speed.

Please note: The vehicle is designed to operate in low speed only in reverse.

When the foot pedal is pressed one rear wheel spins

Sometimes the vehicle doesn’t run, but other times it does

When the go foot pedal is pressed, the vehicle won’t run without a push

High speed lock-out not disconnected. The vehicle was pre-set to run only in low speed until you connect

Operation of vehicle in low speed It is possible that only one rear wheel may spin when both rear

Loose wire or connector Check all wires around the motors and all connectors to make

Motor or electrical switch damage Contact your local Power Wheels® authorized service center for

Loose wire or connector Check all wires around the motors and all connectors to make

“Dead Spot” on motor Contact your local Power Wheels® authorized service center for

the high speed hook-up. Follow the instructions on page 23 to connect High Speed Hook-Up. Note: The high-speed connectors must be joined to use the high speed grip.

wheels are raised off the ground and the vehicle is in low speed. This does not necessarily indicate a problem. Check for proper operation of the drive system by raising the rear wheels off the ground and pressing the foot pedal. If only one rear wheel spins, carefully press your hand on the spinning wheel to slow it down. The other rear wheel should begin to spin. If the other rear wheel does not begin to spin, there may be a problem with the vehicle. Contact your local Power Wheels diagnosis and repair.

sure they are tight.

diagnosis and repair.

sure they are tight.

diagnosis and repair.

authorized service center for

Battery's thermal fuse constantly "trips", but the vehicle is not overloaded nor the driving conditions too severe

Loud clacking or grinding noise from a motor-gearbox

Charger gets warm during use It is normal for some chargers to get

Battery makes a sizzling or gurgling noise when charging

Damaged battery Contact your local Power Wheels® authorized service center for

Child is switching between FORWARD and REVERSE without stopping

Broken gears Contact your local Power Wheels® authorized service center for

warm during use and is not reason for concern.

It is normal for some batteries to make noise and swell slightly while charging and is not reason for concern.

diagnosis and repair.

Teach your child to stop the vehicle before switching direction.

diagnosis and repair.

No action required.

If your charger does not get warm during use, it does not mean that it is not working properly.

No action required.

If your battery does not make noise or swell slightly during charging, it does not mean that it is not accepting the charge.

If, after reviewing the Problems and Solutions Guide, the vehicle still fails to operate, please contact your nearest authorized service center or contact Power Wheels® Consumer Relations toll-free at 1-800-348-0751.

Hint! For faster service when calling Consumer Relations, completely charge the battery before calling and have the following available by the phone:

• vehicle,

• vehicle model number (see label in battery compartment),

• vehicle production run number (see label in battery compartment).

B9785b-0920

Page 28

Before first-time use,

you must charge the battery

18 hours!

Charge the battery immediately after each use.

Charge the battery once a month, even if the vehicle

is not used or stored.

Do not return

your vehicle to the store!

We're a toll-free phone call away, and we can help.

If you are missing parts or need assistance, please call:

1-800-348-0751

Or contact your local independently owned and operated

Power Wheels

For the location nearest you, visit us on-line at www.powerwheels.com.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.

PRINTED IN MEXICO B9785b-0920

PRINTED IN CHINA 73610a-0920

Authorized Service Center.

Fisher-Price B9785 Instruction Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual