Fisher-Price B9701 Instruction Sheet

Rock, Roll ‘n Ride Trike XL

Rock, Roll ‘n Ride Trike XL

TM

Please keep this instruction sheet for future reference, as it contains important information.

Adult assembly is required.

Age: 1

1

/2years - 5 years.

Weight Limit: 50 lbs (23 kg).

Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (all not included).

If you have any questions about this product, or are missing a part, please call

us toll-free at 1-800-432-5437, rather than return this product to the store.

Remove handle for pedaling fun.

Seat adjusts for growing kids!

Rocking fun for littlest ones!

Help toddlers roll along!

Extra long handle for comfort.

Instructions

Model Number: B9701

WARNING

To avoid serious injury:

• Adult supervision required.

• Never use near cars and other motor
vehicles, near streets, steps, sloped drive­ways, hills, roadways, alleys, swimming
pools, or other bodies of water.

• Always wear shoes or sneakers.

• Never allow more than one (1) rider.

Please read these instructions carefully and identify all parts
before assembly. Refer to the parts page for identification.

Call Fisher-Price®Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.

Or, write to:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, New York 14052, U.S.A.

For countries outside the United States:
CANADA

Questions? 1-800-567-7724, Mattel Canada Inc.,

6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

GREAT BRITAIN

Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500302.

AUSTRALIA

Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service
1300 135 312.

NEW ZEALAND

16-18 William Pickering Drive, Albany 1331, Auckland.

ASIA

Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.

Consumer Information

Fasteners

Fasteners

All SHOWN ACTUAL SIZE

#8 x 3" Screw – 1

Cap Nut – 2*

Consumer Information

2

2

#10 x

3

/4" Screw - 11

#8 x 3/4" Screw - 13

* Note: For your convenience,

an extra cap nut is included.

Tighten and loosen all screws with a Phillips

screwdriver. Do not over-tighten screws.

Parts

Parts

Fisher-Price

Seat Pin

Seat

Handlebar

Handle Pin

Frame Cover

Handle Top

Handle Bottom

Base

2 Base/Handle Covers

Fork

Front Wheel

2 Fork Covers

4 Pedal Hubs

Pedal Axle

2 Pedals

Straight Axle

2 Rear Wheels

2 Cap Nuts

2 Wheel Caps

Frame

Footrest

Note: The base/handle assembly
can be attached to the trike in
either the Ride-on Rocker (page 9)
or Learn to Pedal (page 10) mode.

3

3

Parts not shown:
Label Sheet
Assembly Tool

Assembly

Assembly

• Please save all packaging material until assembly is complete to ensure that no parts are discarded.

• Please wipe each part with a clean, dry, cloth before assembling this product.

This product contains small parts in its

unassembled state. Adult assembly is required.

• Place one end of the straight axle into the cap nut.

• Tap the end of the straight axle with a hammer.

Make sure the cap nut is securely attached to
the straight axle.

1

Straight Axle

Cap Nut

2

Rear Wheel
Spoke Side Down

3

• Turn the frame upside down.

• Insert the straight axle assembly through the holes in the
rear of the frame.

• Fit the wheel cap into the center of the wheel. Tap the
wheel cap with a hammer to secure it to the wheel.

Frame

Wheel
Cap

Hole

Hole

Rear Wheel

Straight Axle

• Slide a rear wheel (spoke side down) onto the straight axle.

Bottom View

4

4

Scrap Block
of Wood

CAUTION

Assembly

Assembly

4

• Turn the frame on its side with the exposed end of the
straight axle up.

• Slide the other rear wheel (spoke side up) onto the end of
the straight axle.

• Place a cap nut on the end of the straight axle.

• Cover the cap nut with the assembly tool.

• Tap the assembly tool with a hammer. Gently pull the

rear wheel up to be sure the cap nut is securely
attached to the straight axle.

Cap Nut

Straight Axle

Rear Wheel
Spoke Side Up

• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.

6

Pedal Axle

Tab

Slot

Pedal Hub

• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.

• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.

7

Pedal Hubs

Pedal Axle

Front Wheel Hole

• Fit the wheel cap into the center of the wheel. Tap the
wheel cap with a hammer to secure it to the wheel.

• Set the frame assembly aside.

5

Wheel Cap

5

5

Scrap Block
of Wood

Assembly Tool

• Turn the front wheel assembly over.

• Insert the remaining pedal hubs on top of and below
the pedal axle and into the hole in the center of the
front wheel.

•

Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.

8

Pedal Hub

Pedal Hub

Assembly

Assembly

6

6

• Slide a pedal on the pedal axle. Tap the pedal with a
hammer until it is secure.

• Pull the pedal up to be sure it is secure. If you can
remove it, you have not secured it properly. Tap it with
the hammer again.

• Repeat this procedure to attach the other pedal to the
other end of the pedal axle.

9

Pedal

Pedal Axle

Front Wheel
Assembly

• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the bottom
of each fork arm.

• Place a fork cover over the pedal axle on one fork arm.

• Insert two #10 x 3/4" screws into the fork cover and tighten.

• Repeat this procedure to attach the other fork cover to the
other fork arm, using the #10 x 3/4" screws.

10

Fork Cover

Fork Arms

Groove

Pedal Axle

Scrap Block
of Wood

• Turn the frame upright.

• Insert the fork post up through
the hole in the frame neck.

Make sure the fork is

positioned so that the fork covers face the rear wheels.

• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.

• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post so that part of the screw (about

3

/4")

is still visible

. Tighten the screw.

11

Handlebar

Frame Neck

Fork Covers

Fork Post

3

/

4

"

FIRST, insert the screw

so that

3

/

4

"

is visible,

then tighten.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052, U.S.A.
©2003 Mattel, Inc. All Rights Reserved.
® and TMdesignate U.S. trademarks of Mattel, Inc.

Printed in Mexico B9701pr-0920

• While pushing down on the seat, insert the seat pin
through the hole in the seat and into a seat mount
adjustment hole.

15

Seat Pin

➥

• Insert the knobbed end of the
footrest up through the opening in
the underside, center of the frame .

• Rotate the footrest

1

/4turn .

• Slide the footrest toward the handle­bar as far as it will go until the top of the footrest is
positioned over the opening’s rectangular cut-out.

• Lower the knobbed end of the footrest into the rectangular
cut-out in the frame .

Assembly

Assembly

12

Frame Opening

Footrest

Knobbed End

Footrest

Top View

Knobbed End

7

7

•

Place the frame cover over the frame opening. Make
sure the holes in the frame cover align with the holes
on the frame.

• Insert three #10 x 3/4" screws into the frame cover

and tighten.

13

Frame Cover

• Place the seat on the seat mount.

• Adjust the seat for your child’s comfort by aligning the hole
in the seat with one of the seat mount adjustment holes.

14

Seat Mount Adjustment Holes

Seat

Seat Mount

2

➥

➥

1

2

3

1

3

19

Base/Handle

Flared End

Handle

Cover

• Position the base/handle covers so that the flared end
faces the front of the trike.

• Fit the base/handle covers onto the trike rear frame near
the rear wheels.

• Insert two #10 x 3/4" screws through each handle cover
and tighten.

Assembly

Assembly

• Insert 13 - #8 x 3/4" screws into the handle top and tighten.

17

• Place the base/handle assembly on a flat surface so that
the wheel retainers are upright.

• Fit the trike onto the base/handle assembly so that the
rear frame rests in the grooves in the base and the front
wheel fits between the wheel retainers in the base/handle.

18

Wheel
Retainers

Base/Handle

Grooves

• Fit the handle top and bottom to the end of the base,
as shown.

16

Handle Top

Base

8

8

Handle Bottom

Rock Mode

Rock Mode

• Insert the base/handle pin through one wheel retainer, a
hole in the front wheel and into the other wheel retainer.

• Push the handle pin to “snap” it into place. Pull on the
handle pin to be sure it is secure.

9

9

IMPORTANT! Be sure to adjust the seat in the most forward
position for Rock mode.

Decoration

Decoration

Handle

Place Center

of Label Here

Center of Label

• Before applying the label, wipe the surface of the
handle with a clean, dry cloth to remove any dust or oils.

• Remove the backing from the label.

• First, position the center of the label on the handle,
as shown. Then, smooth each end of the label outward to
attach it to the handle.

• For best results, avoid repositioning a label once it has
been applied to the handle.

Wheel Retainer

Front Wheel

Wheel Retainer

Base/Handle Pin

3

2

Base/Handle

• Insert the handle pin through one side of the base/handle,
through the holes in the back of the frame and out through
the hole in the other side of the base/handle. Make sure

the handle pin “snaps” into place.

• Pull on the handle pin to be sure it is secure.

Base/Handle

• Rotate the base/handle to the upright position.

Handle Pin

10

10

Roll Mode

Roll Mode

• If you are converting from the rock mode, remove the
handle pin from the wheel retainers and front wheel.

1

Wheel Retainer

Front Wheel

Wheel Retainer

Handle Pin

Ride Mode

Ride Mode

2

Base/Handle

• Rotate the base/handle down, under the trike, to the
rock position.

3

Base/Handle

Base/Handle Cover

• Remove the screws from the base/handle covers.

• Remove the base/handle covers.

• Remove the base/handle.

11

11

1

Base/Handle

• If you are converting from the roll mode, remove
the handle pin from the base/handle and the back
of the frame.

Handle Pin

Storage

Storage

Maintenance

Maintenance

• Check plastic parts regularly and if broken or cracked,
dispose of them properly.

• Check all fasteners regularly to be sure they are tight.
If the fasteners are not tight, tighten them as necessary.

• To clean this product, use a mild soap and water solution
and a clean cloth. Rinse clean with water to remove
soap residue.

Helpful Hint: To store for future use, position the handle
covers with the flared end upright and attach them to the
handle using the four screws. Insert the handle pin into
either the holes in the base/handle or through the holes in
the retainers. Store the base/handle in a safe place for future
use in the rock or roll mode.

Handle Cover

Handle Pin

Handle Cover

12

12

• Rotate the footrest up toward the rear wheels and snap it
into the recess in the underside of the frame.

4

Ride Mode

Ride Mode

Flared End