Fisher-Price B8865 User Manual
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Bouncer
Kick & Play
Model Number: B8865
IMPORTANT! KEEP FOR FUTURE REFERENCE.
Please read these instructions before assembly and use of this product.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
Requires one LR20 (“D”) alkaline battery (not included) in the soothing unit.
Requires three LR6 (“AA”) alkaline batteries (not included) in the toy bar.
To prevent serious injury or death:
• It is dangerous to use this reclined cradle on an
elevated surface.
•Never use on a soft surface (bed, sofa, cushion)
since bouncer can tip over and cause suffocation
in soft surfaces.
•Never use as a carrier or lift while child is seated.
• Always use the restraint system.
•Never leave child unattended.
•Never use as a car seat.
• Not recommended for children who can sit up
by themselves (6 months approximately, until
9 kg/20 lb).
WARNING
Warning
2
Occasionally a consumer may experience a problem with one of our
products. If this should happen, please call us, rather than return this
product to the store. Usually, we can solve the problem over the
telephone or send you replacement parts. Please call 01628 500303
or write to: M
attel UK Limited
Mattel House
Vanwall Business Park,
Vanwall Road
Maidenhead, Berkshire SL6 4UB
Consumer Information
Fisher-Price,Inc., a subsidiary of Mattel,Inc., East Aurora, NY 14052 U.S.A. B8865pr-0726
©2003 Mattel, Inc.All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel,Inc. Printed in China
Parts
3
Pad
Toy Bar
Removable
Teether Rings
Footrest with
Soothing Unit
2 Retainers
Seat
Back
Tube
Right Base Wire
Left Base Wire
Base
Tube
#8 x 2 cm (3/4") Screw - 2
Shown Actual Size
•Loosen the screw in the soothing unit battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Insert one LR20 (“D”) alkaline battery.
•Replace the battery compartment door.Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
•Loosen the screw in the toy bar battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three LR6 (“AA”) alkaline batteries.
•Replace the battery compartment door.Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Battery Installation
4
Toy Ba r
Soothing Unit
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of batteries in a fire.The batteries may explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the product before charging.
•If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
5
1.5V
LR20 ("D")
SHOWN ACTUAL SIZE
1.5V x 3
LR6 ("AA")
SHOWN ACTUAL SIZE
+
_
Loading...