1 COVER6 BACK5
3 AAA batteries are included. Use alkaline batteries only.
This product contains magnets.
Do not use around items that are sensitive to or affected by magnetic fields.
Cut the plastic attachments with scissors and discard the pieces.
Wire cutters are needed to remove the cable ties.
Please remove everything from the package and compare to the contents shown here.
If any items are missing, please call 1-800-524-TOYS.
Keep these instructions for future reference as they contain important information.
©2004 Mattel, Inc. El Segundo, CA 90245 U.S.A. All Rights Reserved.
INSTRUCTIONS
CONTENTS
™
B8305-0921
®
CONSUMER INFORMATION
1 (800) 524-TOYS
WE ARE DEDICATED TO QUALITY PRODUCTS.
YOU CAN TELL IT’S MATTEL!™ CALL us toll-free or write with any
comments or questions about our products or service. MondayFriday 8:00 a.m.-6:00 p.m. Eastern Time. Outside U.S.A., see
telephone directory for Mattel listing.
Consumer Relations, Mattel, Inc.
333 Continental Blvd.
El Segundo, CA 90245 USA
Mattel U.K., Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline
01628500303.
Mattel Australia Pty., Ltd., Richmond, Victoria 3121. Consumer Advisory
Service 1300 135 312 (valid only in Australia).
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China.
Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, Menara
Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids
that can cause a chemical burn injury or ruin your toy.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
toy before being charged.
• Rechargeable batteries are only to be charged under
adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct
polarity.
• Exhausted batteries are to be removed from the
toy.
• The supply terminals are not to be shortcircuited.
• Dispose of batteries safely.
• Do not dispose of this toy in a fire. The
batteries inside may explode or leak.
Battery Installation
Batteries included are for demonstration purposes only. For
longer life use only alkaline batteries.
Toy requires 3 replaceable AAA (LR03) alkaline batteries.
Replace batteries when sound becomes distorted and/or lights
become dim.
To replace batteries, use a Phillips head screwdriver (not included)
to open battery door. Remove and set aside. Insert 3 AAA (LR03)
alkaline batteries as shown. Use either AAA (LR03) alkaline
batteries or equivalent. Replace battery cover and screw closed.
ATTENTION: Non-alkaline batteries may not power this toy. Replace
with alkaline batteries for longest life and best performance.
The glitter solution in the bottle is SAFETY TESTED.
ADULT NOTE: All sounds come from the doll. Clothes and accessories are for doll only. They are not intended for real infant
or child use. Cut the plastic attachments with scissors and discard the pieces.
REG. NO. PA-9618(HK). ALL NEW MATERIALS. Consisting of Polyester Fibers. Surface Washable Only.
Troubleshooting
Tiara for you to wear!
Press doll’s left hand for a
variety of doll’s sounds and
light features.
If no lights or music are heard,
check the following:
1. The power is turned ON.
2. The hat is fitted snugly
and tightly, facing
forward with crown up
on the doll’s head.
3. The bib is lined up to the
front of the doll, and is
flat against the doll’s body.
The jeweled side is to the
front.
4. Bottle must be fully
inserted into doll’s mouth
for best lighting.
Fit hat on
doll
snugly
and
tightly.
Bib should be
front
and
close
to doll’s body.
TRY
ME