Fisher-Price B3056 Instruction Sheet
w
w
w
.
r
e
s
c
u
e
h
e
r
o
e
s
.
c
o
m
Model Number: B3056
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Requires three “AA” (LR6) alkaline batteries (not included).
Police Cruiser
Figures sold separately and subject to availability.
B3056pr-0920.qrk 2/23/03 3:29 PM Page 1
2
ASSEMBLY
Attaching the Light Bar
• Carefully feed the wires attached to the bottom of the light bar down into
the slot in the car. Fit the tabs on the bottom of the light bar into the slots
in the top of the car.
• Press down on the light bar to "snap" it in place.
2
1
(Other #1
on opposite
door)
(#2 On opposite side)
3
10
15
16
17
14
4
12
7
6
8913
5
14
Smaller
Wheel
Larger
Wheel
Light Bar
11
Proper label application will help keep labels looking their best!
When applying labels, keep the following guidelines in mind:
• Wash hands before applying labels.
• Before applying labels, wipe the surface of the toy with a clean, dry cloth
to remove dust or oils.
• For best results, avoid repositioning a label once it has been applied.
Attaching the Wheels
• Insert and “snap” the two larger wheels onto the back axles.
• Insert and “snap” the two smaller wheels onto the front axles.
One-time assembly is now complete.
B3056pr-0920.qrk 2/23/03 3:29 PM Page 2
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated on the backpack.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the toy (product). Dispose of batteries safely.
Do not dispose of batteries in a fire. The batteries may explode or leak.
BATTERY INSTALLATION
3
• Locate the battery
compartment door on
the bottom of car.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.
• Insert three, “AA” (LR6) alkaline batteries, as indicated inside the bat-
tery compartment.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
• When lights or sounds from this toy become faint or stop, it’s time for an
adult to change the batteries!
Hint: We recommend using alkaline batteries for longer battery life.
Battery
Compartment
Door
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
B3056pr-0920.qrk 2/23/03 3:29 PM Page 3
Loading...