Fisher-Price B2770 Instruction Sheet
3 AA batteries required. For longer life use only alkaline batteries.
Colors and decorations may vary from those shown.
Please remove everything from the package and
compare to the contents shown here.
If any items are missing, please call 1-800-524-TOYS.
Keep these instructions for future reference as they contain important information.
©2003 Mattel, Inc. El Segundo, CA 90245 U.S.A. All Rights Reserved.
INSTRUCTIONS
CONTENTS
®
B2770-0920
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303.
™
Dolls
&
®
®
BATTERY SAFETY INFORMATION:
1. Non-rechargeable batteries are not to be
recharged.
2. Rechargeable batteries are to be removed from
the toy before being charged.
3. Rechargeable batteries are only to be charged
under adult supervision.
4. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
5. Do not mix old and new batteries
6. Only batteries of the same or equivalent type as
recommended are to be used.
7. Batteries are to be inserted with the correct
polarity.
8. Exhausted batteries are to be removed from
the toy.
9. The supply terminals are not to be shortcircuited.
10. Dispose of batteries safely.
11. Do not dispose of in fire as batteries may
explode or leak.
Battery Replacement
Toy requires 3 replaceable AA or LR 6 alkaline
batteries. Replace batteries when the watercraft
moves too slowly in the water. To replace batteries,
use a Phillips head screwdriver (not included) to open
battery door. Remove and set aside. Insert 3
replaceable AA or LR 6 alkaline batteries as shown.
Use either AA or LR 6 alkaline batteries or equivalent.
Replace battery cover and screw closed.
ATTENTION: Non-alkaline
batteries may not power this
toy. Replace with alkaline
batteries for longest life and
best performance.
Water toys sometimes get messy. Protect play surfaces before use.
Drain, rinse, clean and dry all items thoroughly before storing.
H
o
w
t
o
p
l
a
y
w
i
t
h
y
o
u
r
S
e
a
S
p
l
a
s
h
i
n
’
™
t
o
y
!
PUT TOGETH ER TH E WATERCRAF T
1 Pull out the sides of watercraft.
2 Slide the center part up and
snap onto sides. The front
and back snaps on.
PLAY I N WATER
1 Install 3 AA alkaline batteries (not included).
2 Set rudder for direction.
3 Use ON/OFF switch for power.
Works best in water or on smooth surfaces.
Moves on its own only in water.
YOUR D OLLS CAN RIDE TH E WATERCRAF T
ON/OFF
Float ring does float but will not support doll or dolls.
Loading...