Music and lights respond
to baby’s rocking motion.
Rock, Roll ‘n Ride
Rock, Roll ‘n Ride
Deluxe Trike
Deluxe Trike
Model Number: B2488
Handle helps toddlers roll along.
Turn signals flash, music plays
when they steer left or right!
TM
Remove the handle, flip up
the footrest and
let them take off
on their own! Cool motor
sounds and dashboard
lights encourage pedaling.
Please read these instructions carefully and identify all parts before assembly. Refer to the parts page for identification.
Keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
This product requires three “AA” batteries (included) to operate lights and sounds.
Maximum Weight Limit: 50 lbs (23 kg). For ages: 1
Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (all not included).
If you have any questions about this product, or are missing a part, please call
us toll-free at 1-800-432-5437, rather than return this product to the store.
1
/2years - 5 years.
Consumer Information
Consumer Information
Fasteners
Fasteners
WARNING
To avoid serious injury:
• Adult supervision is required.
• Never use near cars and other motor
vehicles, near streets, steps, sloped
driveways, hills, roadways, alleys,
swimming pools or other bodies of water.
• Always wear shoes or sneakers.
• Never allow more than one (1) rider.
Call Fisher-Price®Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or, write to:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, New York 14052, U.S.A.
FCC Statement (United States Only)
FCC Statement (United States Only)
Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten screws.
3
#10 x
/4" Screw - 11
#8 x 3/4" Screw - 13
Cap Nut – 2*
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user's authority to operate the equipment.
All SHOWN ACTUAL SIZE
* Note: For your convenience,
an extra cap nut is included.
For countries outside the United States:
CANADA
Questions? 1-800-567-7724, Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN
Mattel UK Ltd, V
Helpline: 01628 500302.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service
1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China.
2
2
anwall Business Park, Maidenhead SL6 4UB.
#8 x 4" Screw – 1
Parts
Parts
Note: The base/handle assembly
can be attached to the trike in
either the Rock (page 10) or
Roll (page 11) mode.
Electronic
Handlebar
Frame
Fork
Seat Pin
Frame Cover
Footrest
Seat
2 Base/Handle Covers
Straight Axle
Parts not shown:
Label Sheet
Assembly Tool
2 Rear Wheels
2 Cap Nuts
Front Wheel
Pedal Axle
2 Fork Covers
4 Pedal Axle Covers
Handle Bottom
Handle Pin
2 Pedals
3
3
2 Wheel Caps
Base
Handle Top
Assembly
Assembly
• Please save all packaging material until assembly is complete to ensure that no parts are discarded.
• Wipe each part with a clean, dry, cloth before assembling this product.
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
Rear Wheel
Spoke Side Down
2
• Slide a rear wheel (spoke side down) onto the straight axle.
Straight Axle
Cap Nut
Scrap Block
of Wood
1
• Place one end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to
the straight axle.
Frame
Wheel
Cap
Rear Wheel
Hole
Straight Axle
3
Bottom View
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the
rear of the frame.
• Fit the wheel cap into the center of the wheel. Tap the
wheel cap with a hammer to secure it to the wheel.
4
4
Hole