Page 1
www.fisher-price.com
Model
B1837
Page 2
Welcome to the Imaginext™System
Preschool children will enjoy using all parts of this toy to build structures of their own
creation. At first they will need parental assistance to build the structure on the front cover.
It may be easier to use our step-by-step instructions and give your preschooler only the
parts that will be assembled in each step. The more your child plays with this toy, and
development and skill increases, the less assistance your child will need!
The Imaginext™system lets your child’s imagination come alive.
With Quick-Snap panels™, kids can build different structures in
lots of different ways. Use some of the parts or all of them!
2
Try these
other
assemblies!
For first time use, we
recommend building the
assembly shown inside
these instructions.
This assembly is
recommended for
active play.
Page 3
3
Battery Installation
• Locate the battery compartment
door on the power box.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
•Insert three, "AA" (LR6) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When using the power box and
movement slows or stops, it’s time
for an adult to change the batteries!
Battery Safety Information
Batteries may leak fluids that can cause
a chemical burn injury or ruin your toy. To
avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in a fire.
The batteries may explode or leak.
•Never short circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery
Compartment
Door
1.5V x 3
“AA” (LR6)
Shown Actual Size
Page 4
3.
Let’s Build It!
2.
1.
4
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surfaces of this toy
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied.
x2
1
1
2
6
4
5
3
Proper label application will help to keep the labels looking their best! When applying labels, keep the
following guidelines in mind:
Page 5
4.
6.
5
5.
Snap
Snap
Let’s Build It!
Snap
Page 6
9.
7.
6
8.
10.
Let’s Build It!
Page 7
11.
14.
Let’s Build It!
12.
7
13.
Snap
Snap
Snap
Page 8
17.
15.
8
16.
Let’s Build It!
18.
x2
Snap
Page 9
19.
21.
Let’s Build It!
9
20.
Page 10
22.
10
Let’s Build It!
Add this
extra part
to make
a taller
assembly.
Page 11
11
Building System Tips
Imagine... So Many Ways To Build
Here are a few basic tips of the Imaginext System!
Posts Up
Posts on walls
should always
face up.
Locate Snaps
Note the loca-
tions of the snaps
on platforms.
Walls Before
Platforms
Assemble walls
before attaching
to a platform.
Build Up
Build the bottom
layer first, then
build additional
layers. Use a plat-
form between each
layer of your design.
Spacers Between
Assemblies
Use a spacer to
connect assemblies
when needed.
Snap
Platform
Wall
Assembly
Platform
Layer 1
Layer 2
Platform
Spacer
Assemblies
Wall
Posts Up
Each sold separately and subject to availability.
Each sold separately and subject to availability.
Page 12
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in China
©2003 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. B1837a-0920
Care
Wipe the toy with a clean cloth dampened with a mild soap and water solution.
Do not immerse the toy.
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to:
Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052, U.S.A.
For other countries outside the United States: Canada: call 1-800-567-7724, or write to: Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Warning – Choking Hazard. Not recommended for children under 3 years
because it contains small parts that can be swallowed.
WARNING
Please keep this instruction sheet for future reference, as it contains important information.
For children 4-10 years.
Loading...