Fisher-Price B1831 Instruction Sheet

Page 1
w
w
w
.
f
i
s
h
e
-
p
r
i
c
e
.
c
o
m
B1831
Instructions
Home Sweet Home
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tool needed for assembly and battery installation:
Phillips screwdriver (not included).
Requires three, size “AA” (LR6) alkaline batteries
for operation (not included).
Page 2
2 Posts
Parts
2
CAUTION
This product contains small parts in its unassembled state.
Adult assembly is required.
Parts Not Shown:
3 Figures Table
2 Chairs Stroller Play Center Bed Label Sheet
2 Fences
#6 x
1
/2" Screw - 4
Shown Actual Size
House
Page 3
Assembly
Bottom View
3
Proper label application will help to keep the labels looking their best!
• Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils.
• For best results, do not attempt to apply a label more than once.
• Apply the labels as shown in the illustration above.
Let's Decorate the House!
Post
Post
Pegs
Pegs
• Position the house so the bottom is facing you.
• Align the holes in a post with the matching pegs on the bottom of the house as shown.
• Insert two screws through the post and into the pegs. Tighten the screws with a Phillips screw­driver. Do not over-tighten.
• Repeat this procedure to attach the other post.
• Set the house upright.
7 1016 18 4
22
8
11
12
9
2
13
19
2525
17
20
1
23
24
3
21
14
6
15
5
Page 4
Battery Installation Battery Safety
Information
4
Hint: We recommend using alkaline batteries for longer battery life.
• Locate the battery compartment on the bottom of the toy.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.
• Insert three, new “AA” (LR6) alkaline batteries, as indicated inside the battery compartment.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.
• When sounds from this toy become faint or stop, it’s time for an adult to change the batteries!
SHOWN ACTUAL SIZE
Battery Compartment
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon­zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated on the battery compartment door.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
1.5V x 3
"AA" (LR6)
Page 5
5
Fun Sounds in Every Room!
• Locate the On/Off switch on the bottom of the toy.
• Slide the switch to the•position to turn the toy on and to theoposition to turn it off.
Hint: If your child is not actively playing with this toy, it turns off automatically (sleep mode).
• When your child is finished playing with this toy, slide the On/Off switch to the off position o.
Attaching the Fences
• Push the clamp on one end of a fence onto the post on the base of the toy to "snap" the two parts together.
Clamp
• Push the post on the end of a fence onto the clamp on the base of the toy to "snap" the two parts together.
Fence
Post
Fence
Post
Clamp
Press these buttons around the house to hear many fun sound effects.
Washing Machine
Computer
Crib
Lift Toilet Lid
Telephone
Kitchen Timer
On/Off Switch
Play Room Rug
Page 6
FCC Note
(United States Only)
Consumer Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer­ence in a residential installation. This equip­ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi­cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in Mexico B1831pr-0920
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price
®
Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
Care
For countries outside the United States:
CANADA Questions? 1-800-567-7724. Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500302. AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
• Wipe the toy with a clean cloth dampened with a mild soap and water solution.
• Do not immerse the toy.
Loading...