Fisher-Price B1480 User Manual
B1480
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Requires three “AA” batteries (included).
Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-5437,
rather than return this product to the store. We are available between 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TTD equipment, please call 1-800-382-7470.
Visit us on-line at www.service.mattel.com.
Or write to: Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, N.Y. 14052.
Age: 2-6 years.
Weight limit: 60 lbs (27 kg).
Product features and decoration may vary from the photograph above.
www.fisher-price.com
Action Sounds Trike
Seat
Frame
2 Pedals
2 Fork Covers
Front Wheel
Pedal Axle
Fork
Headlight
Cover
Seat Retainer
Cap
Straight
Axle
2 Rear Wheels
Handlebar
2 Hubcaps
2 Covers
#8 x 3" Screw - 1
BOTH SHOWN ACTUAL SIZE
Note: Some parts shown are assembled to both sides of the trike.
Part not shown: Label Sheet.
Parts
2
#8 x 3/4" Screw - 6
Cap Nut - 2
SHOWN ACTUAL SIZE
IMPORTANT!
• Please save all packaging material until assembly is
complete to ensure that no parts are discarded.
• If you are missing a part, please call toll-free
1-800-432-5437, rather than return this product to
the store.
• Please wipe each part with a clean, dry cloth
before assembly.
Note: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten screws.
This product contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
4 Pedal Hubs
• Fit a cap nut into the cap nut assembly tool. Place one
end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Assembly
3
1
Straight Axle
Hubcap
(Peg Side
Up)
Rear Wheel
(Indented Side
Down)
• Turn the frame upside-down.
• Insert the straight axle through the holes in the rear of
the frame.
Straight Axle
Hole
Hole
Frame
Bottom View
Cap Nut
Assembly
Tool
Scrap Block
of Wood
Cap Nut
Straight
Axle
2
Hubcap
(Peg Side
Down)
Cap Nut
Cap Nut
Assembly Tool
Rear Wheel
(Indented Side Up)
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled
rear wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of
the straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
• Insert one of the tabs on a cover into a slot in the hubcap. Push to snap the cover into place. Repeat this
procedure to attach the other cover to the other hubcap.
Straight Axle
Cover
Hubcap
Bottom View
Scrap
Block of
Wood
4
3
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
Pedal Axle
Ta b
Pedal
Hub Slot
Loading...