For best performance, we recommend replacing the
batteries that came with this toy with three,
new alkaline “AA” (LR6) batteries.
Battery Tips
Battery Replacement
• Locate the battery compartment door
on the bottom of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three “AA” (LR6) alkaline batteries, as indicated
inside the battery compartment.
Hint: We recommend using alkaline batteries for longer life.
• Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy become faint or stop, it’s time for an
adult to change the batteries!
SHOWN ACTUAL SIZE
1.5V x 3
“AA” (LR6)
Battery Compartment Door
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Battery leakage and corrosion can damage
this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire. They may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery
Replacement” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the
cord, plug, enclosure and other parts. Do not use a damaged battery charger
until it has been properly repaired.
2