Fisher-Price 79739 User Manual
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Model Number: 79739
Please keep this instruction sheet for future reference, as it contains important information.
Read all instructions BEFORE assembly and USE of product.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
Requires three “D” (LR20) alkaline batteries for swing operation (not included).
Maximum weight limit for swing use: 25 lbs. (11.35 kg)
IMPORTANT! The maximum weight limit for use as a swing is 25 lbs.
If your child weighs less than 25 lbs., but is really active and appears
to be able to climb out of the swing, immediately discontinue its use.
Product features and decorations may vary from the photos above.
Swing ‘n
Meals
™
It’s a swing. It’s a two-position high chair.
Use it as a traditional swing to soothe and entertain baby with
head-to-toe swinging motion and then convert it to a high chair!
Swing High Chair
79739b-0920.qrk 10/25/01 11:11 PM Page 1
Warnings
Consumer Information
2
Swing
•To prevent falls when using the swing, never use with an active child who may
be able to climb out of the seat.
• Never leave child unattended.
•To prevent serious injury or death from falls or sliding out, always use the
restraint system. Never rely on the tray to restrain child.
High Chair
Prevent serious injury or death from falls or sliding out.
• The child should be secured in the high chair at all times by the restraining system. The restraint belts must be adjusted to fit your child snugly. The tray is not
designed to hold the child in the chair.
• Always keep child in view while in the high chair.
• Never leave child unattended.
• It is recommended that the product is used as a high chair only by children
capable of sitting upright unassisted.
WARNING
Occasionally a consumer may experience a problem with one of our products.If this should happen please call us, toll-free, rather
than return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement parts.
Please call Fisher-Price®Consumer Relations,toll-free at 1-800-432-KIDS,8 AM - 6 PM EST Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment, please call 1-800-382-7470.
Or,write to:Fisher-Price
®
Consumer Relations,636 Girard Avenue, East Aurora,New York 14052.
79739b-0920.qrk 10/25/01 11:11 PM Page 2
Parts
3
Rear Leg with
Housing
Rear Leg with
Motor Housing
Rear Base
Front Base
2 Front Legs
Large High
Chair Tray
Small Swing Tray
Reversible Pad
Seat Frame
Seat
This package contains small parts in
its unassembled state.
Adult assembly is required.
CAUTION
#8 x 11/4" Screw – 2
SHOWN ACTUAL SIZE
79739b-0920.qrk 10/25/01 11:11 PM Page 3
Assembly
4
•Place the front base on a flat surface.
•Position a front leg so that the tapered end is downward,
as shown.
•While pressing the button on one of the front legs, insert it
into the front base. Push down on the front leg until the
button “snaps” into the hole in the front base.
•Repeat this procedure to assemble the other front leg to
the front base.
Front Base
Tap er ed End
Tap er ed End
Front Legs
IMPORTANT!
Before assembly, inspect this product for damaged hardware,loose joints, missing parts or sharp edges. DO NOT use
if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.
•While standing on the front base, pull the front legs up.
The front legs should remain secured to the front base.
If you can remove the front legs,you have not assembled
them correctly to the front base. Reread and repeat
assembly step 1.
•Position the rear leg with housing so that the hub is inward.
•While pressing the upper button on front leg, insert it into
the rear leg with housing slot, as shown. Push the front leg
until the button “snaps” into the hole in the rear leg with
housing.
•Repeat this procedure to assemble the rear leg with motor
housing to the other front leg.
•Pull the front legs down to be sure they are secure in the
housings. If you can remove them, you have not assembled
them correctly.Please re-read and repeat this assembly step.
•Pull both rear legs out until they “sna p” into place.
Press
Button
Press
Button
Hubs
Rear Leg
with
Housing
Slot
Rear Leg
with
Motor
Housing
Front
Legs
Press
Buttons
Front Legs
Pull Up
Pull Up
Pull
Rear
Leg
Pull
Rear
Leg
Front Base
1
2
3
4
79739b-0920.qrk 10/25/01 11:11 PM Page 4
Assembly
5
•Place the rear base on a flat surface, as shown.
•While pressing the buttons on each side of the rear base, fit
the rear legs onto the rear base. Push the rear legs down
until the buttons on the rear base “snap” into the holes in
each rear leg.
Rear Base
Front
Base
Rear
Legs
•While standing on the rear base, pull the rear legs up.
They should remain secured to the rear base. If you can
remove the rear legs, you have not assembled them correctly to the rear base. Re-read and repeat assembly step 5.
•Set the frame assembly aside for Assembly step 8.
Press
Buttons
Rear Legs
Pull Up
Pull Up
Rear Base
5
•Position the seat frame on a
flat surface.
•Fit the hole in the seat hubs
onto the seat frame tubes.
•Press the upper buttons on
the seat frame tubes and
slide the seat down.
•Press the middle buttons on
the seat frame tubes and slide the seat down.
•Press the lower buttons on the seat frame tubes and slide
the seat down.
•The seat should be touching the footrest.
7
6
Seat
Hub
Seat Frame Tubes
Press Upper
Button
Press Middle
Button
Press Lower
Button
Press Lower
Button
Press Middle
Button
Press Upper
Button
Seat
Hub
79739b-0920.qrk 10/25/01 11:11 PM Page 5
Loading...