• Fit the edges of the pad around the sides and bottom edge of the shell.
• Locate the large rectangular opening in the pad.
• Tuck the edges of the large rectangular opening 
around the plastic harness release plate.
Hint: You may want to use the edge of a blunt object 
(such as a butter knife).
Pad assembly is now complete.
5
• Fit the shoulder straps through the small slots 
in the seat bottom. Make sure the shoulder
straps are not twisted.
• Fit the crotch strap through the large slot in the 
bottom of the pad. Make sure the crotch strap
is not twisted.
• Fasten the shoulder straps to the buckle.
• Fit the harness adjustment strap through the 
rectangular opening in the pad.
4
Now, refer back to the Owner’s Manual that came with this car seat! 
If you are using this car seat with a child birth to 1 year:
please refer to page 18 of the Owner’s Manual.
If you are using this car seat with a child 1 year and up:
please refer to page 46 of the Owner’s Manual.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©1999 Mattel, Inc. 
All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 
Printed in U.S.A. 79701-0921
Shoulder 
Straps
Plastic Harness 
Release Plate
Crotch 
Strap