Fisher-Price 79618 User Manual

w
w
w
.
f
i
s
h
r
-
p
r
i
c
e
.
c
o
m
Swing
Deluxe Take-Along
Model Number: 79618
Please keep this instruction sheet, as it contains important information.
Adult assembly is required.
Tool needed for battery installation: Phillips Screwdriver.
Requires four “C”(LR14) alkaline batteries for operation (not included).
Weight Limit: 17 lbs (7.7 kg).
IMPORTANT! The maximum weight limit for this product is 17 lbs. If your child
weighs less than 17 lbs., but is really active and appears to be able to climb
out of the swing, immediately discontinue its use.
Occasionally a consumer may experience
a problem with one of our products.
If this should happen, please call us toll-free,
rather than return this product to the store.
Usually,we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price® Consumer Relations,
toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or, write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
• To prevent falls:
- Never use with an active child who may be able to climb out.
- Never use on any elevated surface.
• To prevent injury or death from falls or sliding out, always use restraint system.
• Never leave child unattended.
WARNING
Warnings
Consumer Information
2
Parts
Pad with Restraint
Front Tube
Frame with Liner
3
2 Frame Tubes
• Rotate the upper frame tube until it "snaps" into an upright position, as shown.
Assembly
4
IMPORTANT! Before assembly,inspect this product for damaged
hardware, loose joints, missing parts or sharp edges.DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replace­ment parts and instructions if needed. Never substitute parts.
• Position the front tube so that the rubber feet are flat on the surface.
• While pressing the button on the lower frame tube,insert it into an end of the front tube. Continue to insert the lower frame tube into the front tube until you
hear a "click".
• While pressing the button on the front tube, insert it into the end of the lower frame tube. Continue to insert the front tube into the lower frame tube until you
hear a "click".
1
2
Upper Frame
Tub e
Rubber
Feet
Down
Press Button on
Lower Frame Tube
Press Button on
Front Tube
Assembly
3
5
• Position the frame with liner so that the seat is over the front tube.
• While pressing the buttons on the upper frame tubes, insert them into the holes in the underside of the frame with liner.
• Continue to insert the upper frame tubes into the frame with liner until you hear a "click" on both sides.
4
Press
Button
on Upper
Frame
Tub e
Frame
with Liner
• Pull the front tube to be sure it is secure to each lower frame tube.
Lower Frame Tub es
Pull
Front
Tub e
Seat
Front Tube
Assembly
5
6
Upper Frame
Tub e
Upper Frame
Tub e
• Fit the pad seat back pocket over the seat back and fasten.
• Fit the pad seat bottom pocket over the seat bottom and fasten .
IMPORTANT! Attach the provided pad (with restraint system) to this product. Never use this product without the provided pad.
6
Pad Seat
Back
Pocket
Pad Seat
Bottom
Pocket
• Check to be sure the upper frame tubes are secure in the frame with liner. If you can remove the upper frame tubes from the frame with liner, you have not properly inserted the tubes into the frame. Remove the upper frame tubes from the frame with liner and repeat Assembly step 4.
Frame
with Liner
B
B
Loading...
+ 14 hidden pages