Fisher-Price 79602 Instruction Sheet
Model Numbers: 79602, 79458, 79615
We’ve Made a Change!
CRADLETTE
Please follow these instructions to begin assembly of your product.
After completing Step 7 in this supplemental please proceed to Step 8, page 5
in the original instructions that came with this product.
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side faces outward.
• Then, insert a bolt through the hole in the opposite side of the base
tube foot and into the motorized panel tube. Tighten the bolt with a
Phillips screwdriver.
IMPORTANT! Do not over-tighten this bolt. If the bolt is over-tightened,
the tube will not pivot open and closed.
• Place a base tube on a flat surface. Note the location of the double
dot on the foot.
• Position the motorized panel so that the tubes bend down. Locate
the double dot on one of the tubes.
• Fit the motorized panel tube (labeled with a double dot) into the
groove in the base tube foot (labeled with a double dot).
1
2
Protruding
Side
Foot
Motorized Panel
Base Tube
Double Dot
Double Dot
Bolt
Foot
Lock Nut
This product contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
3
• Turn the assembly around so the opposite side faces you.
• Place the other base tube on a flat surface. Note the location of a
single dot on the foot.
• Locate a single dot on the motorized panel tube.
• Fit the motorized panel tube (labeled with a single dot) into the
groove in the base tube foot (labeled with a single dot).
Foot
Motorized Panel
Base Tube
Single Dots
Tube
Tube
Tube
ASSEMBLY
IMPORTANT! Before assembly or each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
79602pr-0921Sup.qrk 10/12/0 4:55 PM Page 1
• Turn the assembly around so the opposite side faces you.
• Position the panel so that the tubes bend down. Locate the single
and double dots on the panel tubes.
• Fit the panel tubes into grooves in the base tube feet.
Hint: Match the single and double dots on the panel tubes with the
single and double dots on the base tube feet.
5
ASSEMBLY
Foot
Double Dots
Single Dots
(Not showing
from this
view.)
Panel
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side faces outward.
• Then, insert a bolt through the hole in the opposite side of the base
tube foot and into the motorized panel tube. Tighten the bolt with
a Phillips screwdriver.
IMPORTANT! Do not over-tighten this bolt. If the bolt is overtightened, the tube will not pivot open and closed.
4
Bolt
Foot
Lock Nut
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side faces outward.
• Then, insert a bolt through the hole in the base tube foot and into
the panel tube. Tighten the screw with a Phillips screwdriver.
IMPORTANT! Do not over-tighten this bolt. If the bolt is overtightened, the tube will not pivot open and closed.
6
Bolt
Foot
Lock Nut
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side faces outward.
• Then, insert a bolt through the hole in the base tube foot and into
the panel tube. Tighten the bolt with a Phillips screwdriver.
IMPORTANT! Do not over-tighten this bolt. If the bolt is overtightened, the tube will not pivot open and closed.
7
Bolt
Foot
Lock Nut
Protruding
Side
Protruding
Side
Protruding
Side
Tube
Tube
Tube
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. 79602pr-0921
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Printed in China
79602pr-0921Sup.qrk 10/12/0 4:55 PM Page 2
Loading...