Fisher-Price 79598 Instruction Sheet
SOOTHING SOUNDS
BOUNCER SEAT
Model Number: 79598
Please save these instructions for future reference.
Adult assembly is required. Tools required for assembly: Phillips Screwdriver
and adjustable wrench (not included).
Requires three “C” (LR14) alkaline batteries (not included).
22
Occasionally a consumer may experience
a problem with one of our products.
If this should happen, please call us toll-free,
rather than return this product to the store.
Usually, we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price® Consumer Relations,
toll-free at 1-800-432-KIDS,
between 8 AM - 6 PM EST, Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
CCOONNSSUUMMEERR IINNFFOORRMMAATTIIOONN
WWAARR NNII NNGG SS
To prevent serious injury and/or falls:
• Never use on any elevated surface.
• Never use as a carrier or lift while child
is seated.
• Always use the restraint system.
• Never leave child unattended.
• Never use as a car seat.
• Never use with a child able to sit
up, unassisted.
WARNING
33
PP AARR TT SS
1
/2" Screw - 2
3 Toys
Pad
Footrest
Seatback Tube
Right Base Tube
Left Base Tube
Base
Connector
Cuddle Cushion
Shown Actual Size
Lock Nut - 2
44
BBAATT TT EERR YY IINN SS TT AA LLLL AA TT IIOO NN
• Locate the soothing unit on the footrest wire.
• Loosen the screw in the soothing unit battery compartment door with a
Phillips screwdriver.
• Remove the battery compartment door.
• Insert three "C" (LR14) batteries, as indicated inside the battery compartment.
• Replace the battery compartment door. Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Battery Compartment Door
1.5V x 3
“C” (LR14)
SHOWN ACTUAL SIZE
+
–
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove the
exhausted batteries from the product. Battery leakage and corrosion can damage
the product. Dispose of the batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery
Installation” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged under
adult supervision.
• Rechargeable batteries are to be removed from the product before they
are charged.
• If you use a battery charger, it should be examined regularly for damage to the
cord, plug, enclosure and other parts. Do not use a damaged battery charger until
it has been properly repaired.
55
AASSSSEEMM BB LLYY
• Place the base connector on a flat surface as shown.
• Position the left and right base tubes as shown. Note the locations of the
colored dots on the left and right base tubes.
• Fit the left base tube into the base connector.
• Fit the right base tube into the base connector.
• Make sure both colored dots on the base tubes are covered by the
base connector.
11
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
Base
Connector
Colored Dots
Right Base
Tube
Left Base
Tube
Loading...