Fisher-Price 79436 Instruction Sheet

Download

Page 1

SOOTHING

BOUNCER SEAT

Model Number: 79436

Please save these instructions for future reference.

Adult assembly is required. Tool required for assembly: Phillips Screwdriver (not included).

Requires one “D” (LR20) alkaline battery (not included).

Page 2

WWAARR NNII NNGG SS

WARNING

To prevent serious injury and/or falls:

• Never use on any elevated surface.

• Never use as a carrier or lift while child is seated.

• Always use the restraint system.

• Never leave child unattended.

• Never use as a car seat.

• Never use with a child able to sit up, unassisted.

CCOONNSSUUMMEERR IINNFFOORRMMAATTIIOONN

Occasionally a consumer may experience

a problem with one of our products.

If this should happen, please call us toll-free,

rather than return this product to the store.

Usually, we can solve the problem over the telephone

or send you replacement parts.

Please call Fisher-Price® Consumer Relations,

toll-free at 1-800-432-KIDS,

between 8 AM - 6 PM EST, Monday through Friday.

Hearing-impaired consumers using TTY/TDD equipment,

please call 1-800-382-7470.

Or write to:

Fisher-Price® Consumer Relations

636 Girard Avenue

East Aurora, New York 14052

Page 3

2 Paddles

PP AARR TT SS

Mirror

3 Rings

Pad

Retainer

Right Base Tube

#8 x 3/4" Screw - 2

Shown Actual Size

Footrest

Seatback Tube

Retainer

Base

Connector

Left Base

Tube

Page 4

BBAATT TT EERR YY IINN SS TT AA LLLL AA TT IIOO NN

–

Battery Compartment Door

• Locate the soothing unit on the footrest.

• Insert a coin into the battery compartment door and pry the battery compartment door off.

• Insert one “D” (LR20) alkaline battery, as indicated inside the battery compartment. Be sure to place the battery on top of the ribbon.

Hint: We recommend the use of an alkaline battery for longest battery life.

• Replace the battery compartment door and be sure it snaps securely closed.

Hint: For easy battery removal, simply lift the ribbon.

1.5V

“D” (LR20)

SHOWN ACTUAL SIZE

Battery Tips

• Remove the battery during long periods of non-use. Always remove an exhausted battery from the product. Battery leakage and corrosion can damage the product. Dispose of the battery safely.

• Never short circuit the battery terminals.

• A non-rechargeable battery is not to be recharged.

• Only a battery of the same or equivalent type as recommended in the “Battery Installation” instructions is to be used.

• If a removable rechargeable battery is used, it is only to be charged under adult supervision.

• A rechargeable battery is to be removed from the product before it is charged.

• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.

Page 5

AASSSSEEMM BB LLYY

CAUTION

This package contains small parts

in its unassembled state.

Adult assembly is required.

Right Base

Tube

Base

Connector

• Place the base connector on a flat surface as shown.

• Position the left and right base tubes as shown. Note the locations of the colored dots on the left and right base tubes.

• Fit the left base tube into the base connector.

• Fit the right base tube into the base connector.

• Make sure both colored dots on the base tubes are covered by the

base connector.

Colored Dots

Left Base

Tube

Page 6

AASSSSEEMM BB LLYY

Base Tube

Footrest

Soothing

Unit

Tab

• Position the footrest so that the soothing unit is upright.

• While flexing the base tubes toward each other, hook the footrest onto the ends of the base tubes.

• Push the footrest down completely, to the tabs on the base tubes.

• Make sure the small tabs on the left and right base wires are secure in the base connector holes (see inset). If the small tabs are not secure in the base connector holes, you have assembled the base incorrectly. Disassemble all parts and refer back to Assembly Step 1.

Base Tube

Tab

Base Tube

Base

Connector

Back View

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

Printed in China 79436pr-0920

Page 7

AASSSSEEMM BB LLYY

Seat Back

Tube

Base

Tube

Base Tube

• Position the seat back tube above the base assembly. The seat back tube should bend backward.

• Fit the seat back tube completely onto the base tubes.

Page 8

AASSSSEEMM BB LLYY

Pull Up

Socket

Retainer

• Fit a retainer to the outside of the seat back tube, as shown. Make sure the socket in the retainer is upright.

• Insert a screw through the hole in the seat back tube, base tube and into the inside of the retainer.

• Tighten the screw with a Phillips screwdriver. Do not over-tighten.

• Repeat this procedure to assemble the other retainer to the other side of the seat back tube.

• Pull up on the seat back tube to be sure it is secure. If you can remove either end of the seat back tube, you have not assembled it correctly. Remove the screws, re-read and repeat Assembly steps 3 and 4.

Retainer

Page 9

AASSSSEEMM BB LLYY

Pad

Footrest

• Position the pad with the ruffle up.

• Fit the upper pocket on the back of the pad onto the seat back tube .

• Lift the footrest. Fit the lower pocket on the back of the pad onto the

footrest . Lower the footrest.

Seat Back

Tube

Page 10

AASSSSEEMM BB LLYY

Mirror

Rings

Paddle

Toy Bar

Retainer

Socket

Plugs

Retainer

Socket

• Fit the toy bar plugs into each retainer socket.

• Snap the mirror and the paddles to the toy bar.

• The rings can be attached to the mirror and one of the paddles, as shown.

Hint: Twist the ends of the rings apart to attach themto the mirror or paddle.

• The toy bar is removable. Simply pull out to remove.

1100

Page 11

SSEETT--UUPP && UUSSEE

WARNING

To prevent serious injury and/or falls:

• Never use on any elevated surface.

• Never use as a carrier or lift while child is seated.

• Always use the restraint system.

• Never leave child unattended.

• Never use with a child able to sit up, unassisted.

Belt

Buckle

Restraint

Securing Your Child

• If the toy bar is attached, remove it before placing your child in the seat.

• Place your child in the seat. Position the restraint between your child’s legs.

• Fasten both belts to the buckles on each side of the restraint. Make sure

you hear a “click” on both sides.

• Check to be sure the restraint is securely attached by pulling it away from your child. The restraint should remain attached.

• Attach the toy bar, if desired (see Assembly Step 6).

1111

Page 12

SSEETT--UUPP && UUSSEE

Buckle

Anchored End

Buckle

Anchored End

Free End

Tighten

To tighten the belts:

• Feed the anchored end of the belt up through the buckle to form a loop .

• Pull the free end of the belt strap .

• Repeat this procedure to tighten the other belt strap.

To loosen the belts:

• Feed the free end of the belt up through the buckle to form a loop . Enlarge the

loop by pulling on the end of the loop toward the buckle.

• Pull the anchored end of the belt strap to shorten the free end of the belt strap .

• Repeat this procedure to loosen the other belt strap. Please Note: After adjusting the belts to fit your child, make sure you pull on them

to be sure they are securely fastened.

Free End

Loosen

Soothing Vibrations

• Make sure your child is properly secured in the seat.

• Slide the ON/OFF switch on the soothing unit to the ON position. The seat will vibrate.

• Slide the ON/OFF switch on the soothing unit to the OFF position. The seat will not vibrate. IMPORTANT! If vibrations from the soothing unit become faint, or if there are no vibrations,

remove the battery from the soothing unit and dispose of it properly. Replace the battery with a new “D” (LR20) alkaline battery.

CC AA RR EE

The pad is machine washable. Wash the pad separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. The frame, toy bar, mirror, paddles and rings may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the soothing unit.

1122