Fisher-Price 79415 User Manual
My Little Desk Bed
Model Number: 79415
Please read these instructions and keep them for future reference.
Adult assembly is required.
My Little Desk Bed is recommended for children who are at
least 15 months old and are ready to progress from a crib to a bed,
including being able to get on and off a bed unassisted.
Maximum weight: 50 lbs.
Tools needed for assembly: Hammer and Two Phillips Screwdrivers.
TM
Instructions
WARNING
• Use only a full size crib mattress at least 271/4" (690 mm) by 515/8" (1310 mm) by 5" (127 mm) thick.
• Never place bed near windows where cords from blinds or drapes may strangle child.
• Regularly inspect bed for damage. DO NOT use bed if any parts are missing or broken.
Call Fisher-Price (1-800-432-KIDS in U.S.) for replacement parts and instructions if needed.
DO NOT substitute parts.
• Make sure the space between the bed and the wall or other furniture is less than 2
3
/8" or more
than
8".
Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us,toll-free,
rather than return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement
parts. Please call Fisher-Price Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Affairs,
636 Girard Avenue, East Aurora, New York 14052.
32
Message to Parents
Toddler Bed Assembly
F
i
s
h
e
r
-P
r
i
c
e
®
Curved Side Rail – 2
Straight Side Rail – 2
Crimped
Mattress Tube – 4
Mattress Tube – 2
Left Side Panel
Right Side Panel
Headboard
Footboard
#10 – 24 x 11/4" Screw – 2
#10 – 24 x 1/2" Barrel Nut – 10
(ALL SHOWN ACTUAL SIZE)
Failure to follow these warnings and the assembly instructions could result
in a serious injury or death from entrapment or strangulation.
• Please save all packaging material until assembly is complete to ensure no parts are discarded.
• Before assembling My Little Desk BedTM, please wipe each part with a clean, dry cloth.
#10 – 24 x 11/2" Screw – 8
Mattress Retainer – 2
©1997 Fisher-Price, Inc., East Aurora, New York 14052 79415 3 79415-0920
• Check to be sure the crimped mattress tubes are inserted
properly.
• There is a metal tab on one side of the crimped end. Make
sure the metal tab is not showing.
• Pull up firmly on the crimped mattress tubes to be
sure they are securely in place.
• If the crimped mattress tubes can be removed from the
straight side rail, re-read and repeat step .
• Insert the mattress tube into the hole in the straight side rail.
3
1
2
Straight Side Rail
Crimped Mattress Tubes
Straight Side Rail
Crimped Mattress Tube
Helpful Hint: The assembly of the crimped mattress
tubes to the straight side rail is permanent.Once assembled
properly, you will be unable to remove the crimped mattress
tubes.
• Place one of the straight side rails on a soft, flat surface.
• Insert a crimped mattress tube into each slot in the straight
side rail.
• Tap the ends of the crimped mattress tubes with a hammer
until they snap into place.
Metal Tab
Showing
INCORRECT
CORRECT
Mattress Tube
Mattress Tube
Straight Side Rail
CAUTION
Please keep small parts and
plastic bags out of children’s reach.
Dispose of plastic bags properly.
33
Toddler Bed Assembly
1
Loading...