Fisher-Price 79029 User Manual
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Model Number: 79029
Please read these instructions before assembly and use of this product.
Keep this instruction sheet for future reference,as it contains important information.
With seat in place, for use by children who have the neck control to hold their head upright.
To prevent falls, never use with an active child who may be able to climb out of the seat.
Adult assembly is required.
This product requires three “C” (LR14) alkaline batteries (not included).
Tool needed for battery installation: Phillips Screwdriver (not included).
Step & Play Piano
Product features may vary from picture above.
2
To prevent serious injury or death:
• When seat is in place, use only for
a child who is able to hold head
upright unassisted and who is not
able to walk.
•Never leave child unattended.
Always keep child in view while
in product.
•Never use near steps or pools,
hot surfaces or areas that may be
hazardous to a child. Product may
move during use.
•To avoid tip over, place product on
a flat, level surface.
WARNING
Occasionally a consumer may experience a problem with
one of our products. If this should happen, please call us
toll-free, rather than return this product to the store.
Usually,we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price® Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or,write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
For other countries outside the United States:
Canada: call 1-800-567-7724,or write to:Mattel Canada Inc.,6155 Freemont
Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty.Ltd.,658 Church Street,Locked Bag #870,
Richmond,Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Asia: Mattel East Asia Ltd, Room 1106,South Tower, World Finance Centre,
Harbour City,Tsimshatsui, HK, China.
Consumer Information
Warning
3
Parts
Pad
2 Legs with
▲ Detail
Base
Seat Ring
4 Rollers
Seat Base
Upper Rail with Leg
Upper Rail
Trumpet
Bell
Mirror
Tray
Maraca
Tambourine
Leg with
● Detail
4 4 4 4 4 4
3 3 3 3 3 3
111111
2 2 2 2 2 2
2
2
2
1
1
1
334
4
Note: The legs and base sockets have been coded with tape.Do not remove the tape
until you have completed assembly of this product.
2
2
4
Assembly
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints,missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
2
•Locate the leg with tape on it.
•Locate the matching tape covering the socket in the base.
•Align the tab on the leg with the slot in the base socket.
• Insert and “snap” the leg into the base socket.
4 4 4 4 4 4
3 3 3 3 3 3
2 2 2 2 2 2
111111
1
1
1
1
•Locate the upper rail with leg and tape on it.
•Remove the cardboard attached to the wire connector. Throw
the cardboard away.
•Pull the wire connector out from the hole in the bottom of
the leg.
2
Tap e
Base Socket
Wire Connector
Tap e
2
Upper Rail with Leg
Cardboard
Leg
•Position the upper rail with leg so that the leg with tape is
over the base socket with matching tape.
• Insert and “snap” the leg with tape into the socket with
matching tape.
•Now, firmly push the upper rail above the leg with tape on
it. Make sure you hear a “snap”.
•Firmly push the upper rail above the leg with tape on it.
Make sure you hear a “snap”.
•Pull up on the upper rail to be sure it is secure.
2
2
2
4 4 4 4 4 4
2
2
1
1
3 3 3 3 3 3
2 2 2 2 2 2
3
Upper Rail
with Leg
Base Socket
PUSH
PUSH
Tap e
2
1
1
2
2
3
3
4
4
4 4 4 4 4 4
3 3 3 3 3 3
4
Base Socket
Base Socket
•Locate the legs with tape on them.
•Locate the matching tape covering the sockets in the base.
•Align the tabs on the legs with the slots in the base sockets.
• Insert and “snap” the legs into the base sockets.
4
3
Tap e
4
Tap e
3
Loading...