Fisher-Price 79026 User Manual
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Infant-to-Toddler Rocker
Model Number: 79026
Please keep this instruction sheet, as it contains important information.
Use the upright position only when your child has developed enough upper body control to sit without leaning forward.
Always use the restraint until your child is able to climb in and out of the chair unassisted.
Designed for use with children from birth to 40 lbs (18 kg).
Adult assembly is required.Tool needed for assembly: Phillips Screwdriver (not included).
Requires one “D”(LR20) alkaline battery (not included) for vibrations unit operation.
Infant Seat
Toddler Seat
L
E
A
R
N
I
N
G
P
A
T
T
E
R
N
S
L
E
A
R
N
I
N
G
P
A
T
T
E
R
N
S
™
Warning
To prevent serious injury and/or falls:
• Never use on any elevated surface.
• Always use the restraint until the
child is able to climb in and out of
the chair unassisted.
• Never leave child unattended.
• Use the upright position only when
child has developed enough upper
body control to sit without leaning
forward.
WARNING
2
Parts
IMPORTANT! Please remove all parts from the package
and identify them before assembly.The kickstand is
packaged within the pad at the factory. Before beginning
assembly,please remove kickstand from the pad.
2 Side
Rails
2 Retainers
with Lock Nut
Cross Brace
Front Tube
Kickstand
Toy Bar
3 Toys
All Shown Actual Size
#8 x
3
/4" Screw - 2
#8 x 1
1
/8" Screw - 2
M4 Lock Nut - 2
(Inside Retainers)
Occasionally a consumer may experience a problem with
one of our products. If this should happen, please call us
toll-free, rather than return this product to the store.
Usually,we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price® Consumer Relations, toll-free at
1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or, write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
For other countries,outside the United States:
Canada: call 1-800-567-7724,or write to: Mattel Canada Inc., 6155 Freemont
Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Consumer Information
Seat Back
Tube
Pad
Assembly
IMPORTANT! Before assembly, inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken.
Contact Fisher-Price® for replacement parts and instructions
if needed. Never substitute parts.
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
• Position each side rail so that the button faces outward.
• Fit the cross brace between the side rails, as shown.
• Push the cross brace down to“snap” it into place.This may
require a lot of force.
Side Rails
1
• Insert a screw through the hole in the bottom of each side
rail and into the cross brace.Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
3
2
Shown Actual Size
#8 x
3
/4" Screw
Cross Brace
Button
Side
Rails
Push
Cross
Brace
• Insert the seat back tube into the socket in each side rail.
• While pressing the tabs on the ends of the seat back tube,
continue to insert the seat back tube into the sockets in
each side rail, until the tabs “snap” into place. Make sure
you hear a “snap” on each side.
• Pull the seat back tube up to be sure it is secure in the
side rail sockets.
3
Seat Back Tube
Press Tabs
Side Rail
Sockets
Push
4
4
Assembly
• Locate the hole in each side rail.
• With the vibrations unit facing forward, fit the front tube
to the side rails, as shown. Hold the front tube in place
and proceed to step 5.
Front Tube
Side Rail
Hole
Side Rail
Hole
Vibrations
Unit
• Insert a #8 x 11/4” screw
through the outside of
each side rail and into the
ends of the front tube.
Side
Rail
Side
Rail
Front Tube
5
Shown Actual Size
#8 x 1
1
/4" Screw
IMPORTANT! Please follow the next assembly (step 6)
carefully to completely secure the front tube to the
side rails.
Loading...