Fisher-Price 79024 Instruction Sheet

SOUNDS 'N LIGHTS DELUXE
SOOTHING BOUNCER
Model Number: 79024, 79439, 79613
Please save these instructions for future reference.
Tool needed for adult assembly: Phillips screwdriver (not included).
Requires one “D” (LR20) alkaline battery (not included) in the soothing unit.
Requires three “AA” (LR6) alkaline batteries (not included) in the toy bar.
Slide switch to
2
Occasionally a consumer may experience
a problem with one of our products.
If this should happen, please call us toll-free,
rather than return this product to the store.
Usually, we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price
®
Consumer Relations,
toll-free at 1-800-432-KIDS,
between 8 AM - 6 PM EST, Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
CONSUMER INFORMATION
WARNINGS
To prevent serious injury and/or falls:
• Never use on any elevated surface.
• Never use as a carrier or lift while child is seated.
• Always use the restraint system.
• Never leave child unattended.
• Never use as a car seat.
• Never use with a child able to sit up unassisted.
WARNING
3
PARTS
#8 - 32 x 1/2" Screw - 2
Shown Actual Size
2 Flowers
Butterfly
2 Paddles
Toy Bar
Pad
Footrest with
Soothing Unit
Seatback
Tube
Right Base
Tube
Left Base
Tube
Base
Connector
#8 - 32 Nut - 2
Shown Actual Size
4
BATTERY INSTALLATION
Soothing Unit
• Locate the soothing unit on the footrest.
• Insert a coin into the battery compartment door and pry the battery compartment door off.
• Insert one “D” (LR20) alkaline battery, as indicated inside the battery compartment. Be sure to place the battery on top of the ribbon.
Hint: We recommend the use of an alkaline battery for longest battery life.
• Replace the battery compartment door and be sure it snaps securely closed.
Hint: For easy battery removal, simply lift the ribbon.
Battery Compartment Door
1.5V
“D” (LR20)
SHOWN ACTUAL SIZE
+
BATTERY INSTALLATION
Toy Bar
• Locate the battery compartment door on the back side of the toy bar.
• Loosen the screw in the battery compartment door with a Phillips screwdriver and lift to remove the door.
• Insert three "AA" (LR6) alkaline batteries, as indicated inside the battery compartment. Be sure to place the batteries on top of the ribbon.
Hint: We recommend the use of alkaline batteries for longest battery life.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.
Hint: For easy battery removal, simply lift the ribbon.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove the exhausted batteries from the product. Battery leakage and corrosion can damage the product. Dispose of the batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery Installation” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the product before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.
SHOWN ACTUAL SIZE
1.5V x 3
“AA” (LR6)
+
5
Loading...
+ 11 hidden pages